FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on my Toyota Corolla E140 (2006-2013)? - Toyota Corolla
Home/Cars/Toyota/Corolla/E140 (2006-2013)/how to reset the maintenance light on my Toyota Corolla E140 (2006-2013)?

how to reset the maintenance light on my Toyota Corolla E140 (2006-2013)?

Toyota Corolla E140 (2006-2013)

Error Codes
5 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
349 words

Problem Statement

Learn how to reset the maintenance light on your 2006-2013 Toyota Corolla E140 with this simple step-by-step guide. Quick and easy instructions.

Affected Component
Electrical
Estimated Time
5 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in a safe location when performing this procedure.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •No other warning lights present
  • •Regular maintenance service performed (oil change, filter change, etc.)

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None required for this procedure

Parts Required

  • •None required for this procedure

Additional Information

Affected Component
Electrical
Estimated Time
5 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather all necessary tools and materials.
  • Ensure the vehicle is parked on a level surface and the ignition is turned off.
2. Resetting the Maintenance Light
  1. Turn Off Ignition: Make sure the ignition is completely turned off.
  2. Press and Hold Odometer Reset Button: Locate the odometer reset button on the instrument cluster and press it down.
  3. Turn Ignition On: While continuing to hold the odometer reset button, turn the ignition key to the "ON" position (do not start the engine).
  4. Wait for Light to Reset: Keep holding the odometer reset button until you see the maintenance light blink and then turn off. This may take a few seconds.
  5. Release the Odometer Reset Button: Once the light is off, you can release the button.