FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on my Toyota Corolla E140 (2006-2013) - Toyota Corolla
Home/Cars/Toyota/Corolla/E140 (2006-2013)/how to reset the maintenance light on my Toyota Corolla E140 (2006-2013)

how to reset the maintenance light on my Toyota Corolla E140 (2006-2013)

Toyota Corolla E140 (2006-2013)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
353 words

Problem Statement

Learn how to reset the maintenance light on your 2006-2013 Toyota Corolla E140 with this simple step-by-step guide. No tools required.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in park and on a level surface before performing the reset.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •Potentially missed scheduled maintenance reminders
  • •No engine performance issues related to the maintenance light

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None required for this procedure.

Parts Required

  • •None required for this procedure.

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools: None required for the reset process.
  • Ensure the vehicle is parked securely and the transmission is in the park position.
2. Resetting the Maintenance Light

  1. Turn Off the Ignition

    • Ensure the car is completely turned off.

  2. Press and Hold Odometer Button

    • Locate the odometer button on the instrument cluster and press it firmly.

  3. Turn Ignition On

    • With the odometer button held down, turn the ignition key to the ON position without starting the engine.

  4. Wait for the Reset

    • Keep holding the odometer button until the maintenance light turns off, which usually takes about 10 seconds.

  5. Release the Odometer Button

    • Once the maintenance light is off, release the odometer button.