FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on my Toyota Corolla E140 (2006-2013) - Toyota Corolla
Home/Cars/Toyota/Corolla/E140 (2006-2013)/how to reset the maintenance light on my Toyota Corolla E140 (2006-2013)

how to reset the maintenance light on my Toyota Corolla E140 (2006-2013)

Toyota Corolla E140 (2006-2013)

Error Codes
5 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
355 words

Problem Statement

Learn how to reset the maintenance light on your Toyota Corolla E140 (2006-2013) with this simple step-by-step guide. Quick and easy instructions.

Affected Component
Electrical
Estimated Time
5 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in park or neutral and on a flat surface before performing the reset.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •Reminder for oil change or service indicated
  • •No other performance issues related to the vehicle

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None required

Parts Required

  • •None required

Additional Information

Affected Component
Electrical
Estimated Time
5 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Ensure the vehicle is parked safely and the ignition is off.
  • Gather necessary tools: none required for this reset procedure.
2. Reset the Maintenance Light

  1. Ignition Off

    • Turn the ignition switch to the "OFF" position.

  2. Press and Hold Reset Button

    • Locate the trip meter reset button on the instrument panel.
    • Press and hold the trip meter reset button.

  3. Turn Ignition On

    • While holding the reset button, turn the ignition switch to the "ON" position (do not start the engine).

  4. Observe the Maintenance Light

    • Keep holding the reset button until the maintenance light begins to blink and then turns off.

  5. Release Reset Button

    • Once the maintenance light is off, release the trip meter reset button.