FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on my Toyota Corolla E140 (2006-2013) - Toyota Corolla
Home/Cars/Toyota/Corolla/E140 (2006-2013)/how to reset the maintenance light on my Toyota Corolla E140 (2006-2013)

how to reset the maintenance light on my Toyota Corolla E140 (2006-2013)

Toyota Corolla E140 (2006-2013)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
354 words

Problem Statement

Learn how to reset the maintenance light on your 2006-2013 Toyota Corolla E140 with this step-by-step guide. Quick and easy instructions included.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is parked on a level surface and is in 'Park' or 'Neutral' before attempting to reset the maintenance light.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •Reminder notification for scheduled maintenance
  • •No change in vehicle performance

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None

Parts Required

  • •None

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Ensure the vehicle is parked in a safe location.
  • Gather necessary tools: none required, just the vehicle's keys.
2. Resetting the Maintenance Light
  1. Turn Off Vehicle: Make sure the ignition is in the "OFF" position.
  2. Press and Hold Odometer Reset: Locate the odometer reset button on the instrument panel and press it down firmly.
  3. Turn Ignition On: With the odometer reset button still pressed, turn the ignition key to the "ON" position (do not start the engine).
  4. Wait for Light to Reset: Hold the odometer reset button until the maintenance light flashes and then goes off (approximately 10 seconds).
  5. Release the Button: After the light has turned off, release the odometer reset button.
  6. Turn Ignition Off: Turn the ignition key back to the "OFF" position.