FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on a Toyota Corolla E140 (2006-2013) - Toyota Corolla
Home/Cars/Toyota/Corolla/E140 (2006-2013)/how to reset the maintenance light on a Toyota Corolla E140 (2006-2013)

how to reset the maintenance light on a Toyota Corolla E140 (2006-2013)

Toyota Corolla E140 (2006-2013)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
375 words

Problem Statement

Learn how to reset the maintenance light on a 2006-2013 Toyota Corolla E140. Step-by-step guide to clear the notification after maintenance.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in a safe location to prevent accidents while performing the reset.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •Potentially prompted by a recent oil change or service
  • •Vehicle maintenance reminder is overdue

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •No specific tools are required.

Parts Required

  • •No parts are required for this procedure.

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools: None required for this procedure.
  • Ensure the vehicle is parked in a safe location with the engine off.
2. Reset Maintenance Light

  1. Turn Ignition ON

    • Insert the ignition key and turn it to the "ON" position (do not start the engine).

  2. Press and Hold Odometer Button

    • Locate the odometer reset button, usually found on the instrument panel.
    • Press and hold the odometer reset button.

  3. Watch for Maintenance Light

    • While holding the button, observe the maintenance light on the dashboard. It will flash and then turn off, or the odometer display will reset to "000000".

  4. Turn Ignition OFF

    • Release the odometer reset button.
    • Turn the ignition key back to the "OFF" position.

  5. Verify Reset

    • Turn the ignition back to the "ON" position to ensure the maintenance light is no longer illuminated.