FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how do I reset the maintenance light in my Toyota Corolla E140 (2006-2013) - Toyota Corolla
Home/Cars/Toyota/Corolla/E140 (2006-2013)/how do I reset the maintenance light in my Toyota Corolla E140 (2006-2013)

how do I reset the maintenance light in my Toyota Corolla E140 (2006-2013)

Toyota Corolla E140 (2006-2013)

Error Codes
less than 5 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
368 words

Problem Statement

Learn how to reset the maintenance light on your 2006-2013 Toyota Corolla E140. Step-by-step guide for a quick and easy reset procedure.

Affected Component
Electrical
Estimated Time
less than 5 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is parked on a level surface and the ignition is off before performing the reset.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •Dashboard displays a reminder for scheduled maintenance
  • •No other warning lights activated

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None

Parts Required

  • •None

Additional Information

Affected Component
Electrical
Estimated Time
less than 5 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools: none required for this reset procedure.
  • Ensure the vehicle is parked safely with the ignition off.
2. Reset Maintenance Light
  1. Position the Vehicle: Ensure the vehicle is in "Park" or "Neutral" and the ignition is off.
  2. Press and Hold the Trip Meter Button: Locate the trip meter reset button on the instrument cluster and press it down. Hold it firmly throughout the process.
  3. Turn Ignition to ON: While continuing to hold the trip meter reset button, turn the ignition key to the "ON" position without starting the engine.
  4. Wait for the Light to Blink: Keep holding the button until the maintenance light on the dashboard blinks and then turns off. This usually takes about 10 seconds.
  5. Release the Button: Once the light has turned off, release the trip meter reset button.