why does my Toyota Camry XV70 (2018-2024) shake when I brake?

Toyota Camry XV80 (2025-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

542 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix brake shaking issues in Toyota Camry XV70 (2018-2024). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always use jack stands when working under a lifted vehicle.
•Allow brakes to cool before working on them to prevent burns.

Symptoms

•Vehicle shakes or vibrates when applying the brakes
•Pulsation felt through the brake pedal
•Possible squeaking or grinding noise from the brake area
•Steering wheel vibration during braking
•Uneven tire wear

Diagnostic Steps

1
Inspect brake rotors for warping or damage using a run-out gauge.
2
Check brake pads for uneven wear or glazing.
3
Examine suspension components (control arms, ball joints) for wear or play.
4
Inspect wheel bearings for looseness or damage.
5
Check tire balance and alignment to rule out related issues.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack and jack stands
•Lug wrench
•Socket set
•Torque wrench
•Caliper and run-out gauge

Parts Required

•Brake rotors (if warped)
•Brake pads (if worn)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather necessary tools and parts before starting the repair.
Ensure the vehicle is parked on a flat surface with the parking brake engaged.
Wear safety glasses and gloves for protection.

2. Lift Vehicle

Use a jack to lift the front or rear of the vehicle, depending on where the shaking occurs.
Secure with jack stands for safety.

3. Remove Wheel

Use a lug wrench to loosen and remove the wheel nuts.
Take off the wheel to access the brake components.

4. Inspect and Replace Brake Rotors

Inspect Rotors:
- Measure rotor thickness and check for warping using a caliper.
Replace Rotors (if necessary):
- Remove caliper bolts using a socket set and hang the caliper securely (do not let it hang by the brake line).
- Remove the rotor by unscrewing any retaining screws and sliding it off the hub.
- Install new rotors, ensuring they are properly seated.
- Torque retaining screws to the manufacturer’s specifications (typically around 10-15 ft-lbs).

5. Inspect and Replace Brake Pads

Inspect Pads:
- Check for thickness and even wear. Replace if less than 3mm.
Replace Pads (if necessary):
- Remove the caliper bracket if needed to access the pads.
- Slide out old pads and replace with new, ensuring proper orientation.
- Reinstall caliper and torque bolts to specifications (usually 25-30 ft-lbs).

6. Reassemble and Lower Vehicle

Reinstall the wheel and hand-tighten the lug nuts.
Lower the vehicle and torque lug nuts to the manufacturer’s specifications (typically 76-80 ft-lbs).

7. Test Drive

After completing the repairs, take the vehicle for a test drive to ensure the issue is resolved.