why does my Toyota Camry XV50 (2012-2017) have a check engine light with code P0700

Toyota Camry XV80 (2025-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

Error Code: P0700

3 min read

499 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Diagnose and fix P0700 transmission control issues in Toyota Camry XV50 (2012-2017). Step-by-step guide with diagnostic procedures and repair instructions.

Error Code

P0700

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before removing any components related to the transmission.

Symptoms

•Check engine light illuminated
•Erratic shifting or delayed engagement
•Transmission slipping or harsh shifting
•Reduced fuel efficiency
•Possible loss of cruise control functionality

Diagnostic Steps

1
Scan for additional error codes using an OBD-II scanner to identify specific transmission-related issues.
2
Visually inspect the transmission fluid level and condition; low or contaminated fluid may affect transmission performance.
3
Check the wiring and connectors related to the transmission control module (TCM) for damage or corrosion.
4
Inspect the transmission control module for faults or failure.
5
Test the transmission solenoids for proper operation using a multimeter.
6
Verify the function of the vehicle speed sensor (VSS) as it may affect transmission operation.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Transmission dipstick
•Socket set
•Funnel

Parts Required

•Transmission fluid (specific type as per manufacturer)
•Transmission solenoids (if faulty)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for additional error codes using an OBD-II scanner to identify specific transmission-related issues.
2
Visually inspect the transmission fluid level and condition; low or contaminated fluid may affect transmission performance.
3
Check the wiring and connectors related to the transmission control module (TCM) for damage or corrosion.
4
Inspect the transmission control module for faults or failure.
5
Test the transmission solenoids for proper operation using a multimeter.
6
Verify the function of the vehicle speed sensor (VSS) as it may affect transmission operation.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a level surface and the engine is off.
Disconnect the negative battery terminal to prevent electrical shorts.

2. Check Transmission Fluid

Tools Required: Transmission dipstick, funnel
Remove the transmission dipstick and check the fluid level; add the correct type of ATF if low.
Inspect fluid color and smell; if burnt or contaminated, consider a fluid change.

3. Inspect Wiring and Connectors

Tools Required: Multimeter, basic hand tools
Examine the wiring harness connected to the TCM and transmission. Look for frayed wires or loose connections.
Use a multimeter to check for continuity in the wiring.

4. Test Transmission Control Module (TCM)

Tools Required: OBD-II scanner, multimeter
Using the OBD-II scanner, check for any stored codes specific to the TCM.
If necessary, remove the TCM from its mounting location and visually inspect it for damage or corrosion.

5. Test Transmission Solenoids

Tools Required: Multimeter, socket set
Locate and remove the transmission solenoids.
Test them with a multimeter to ensure they are within manufacturer specifications.

6. Reassemble and Reconnect

Reinstall any components removed during inspection or testing.
Reconnect the negative battery terminal.