what can cause my Toyota Camry XV70 (2018-2024) to shake when braking

Toyota Camry XV80 (2025-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

517 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix brake shaking in Toyota Camry XV70 (2018-2024). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect battery before working on electrical systems.
•Allow the brakes to cool before touching them after driving.

Symptoms

•Vehicle shakes or vibrates when braking
•Steering wheel may vibrate during braking
•Increased pedal effort required to stop
•Brake pads or rotors may show uneven wear
•Possible grinding noise during braking

Diagnostic Steps

1
Inspect brake components visually for wear or damage.
2
Use an OBD-II scanner to check for any related error codes.
3
Measure rotor thickness with a micrometer to ensure they are within specifications.
4
Check for brake pad wear and ensure they are not worn down to the backing.
5
Inspect suspension components (tie rods, ball joints) for wear or damage.
6
Check tire balance and alignment to rule out other causes of vibration.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Torque wrench
•Jack and jack stands
•Micrometer

Parts Required

•Brake rotors
•Brake pads

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect brake components visually for wear or damage.
2
Use an OBD-II scanner to check for any related error codes.
3
Measure rotor thickness with a micrometer to ensure they are within specifications.
4
Check for brake pad wear and ensure they are not worn down to the backing.
5
Inspect suspension components (tie rods, ball joints) for wear or damage.
6
Check tire balance and alignment to rule out other causes of vibration.

Solution

1. Preparation

Gather tools and parts required for the repair.
Ensure the vehicle is parked on a level surface and engage the parking brake.
Disconnect the battery to ensure safety.

2. Remove Wheel

Use a jack to lift the vehicle and secure it with jack stands.
Remove the lug nuts using a socket set and take off the wheel to access the brake components.

3. Inspect and Replace Brake Rotors

Inspection:
- Remove the caliper bolts with a socket set and carefully lift the caliper off the rotor.
- Inspect the rotor surface for warping or scoring.
Replacement:
- If the rotor is damaged or warped, remove it from the hub.
- Install new rotors, ensuring they are oriented correctly.
- Torque the rotor retaining screws to the manufacturer's specifications.

4. Inspect and Replace Brake Pads

Remove the old brake pads from the caliper bracket.
Inspect the caliper bracket and clean it if necessary.
Install new brake pads, ensuring they fit snugly in the bracket.

5. Reassemble Components

Reattach the caliper over the new pads and torque the caliper bolts to specifications.
Reinstall the wheel and hand-tighten the lug nuts.
Lower the vehicle and torque the lug nuts to the manufacturer’s specifications.

6. Final Checks

Reconnect the battery.
Pump the brake pedal a few times to ensure proper brake function.
Check for any fluid leaks around the brake assembly.