my Toyota Camry XV70 (2018-2024) transmission is slipping when shifting gears, what’s wrong?

Toyota Camry XV80 (2025-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

524 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix transmission slipping in Toyota Camry XV70 (2018-2024). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is on a level surface and the engine is off before starting work.
•Ensure the vehicle is securely lifted and supported if working underneath.
•Allow the engine to cool before working on the transmission.

Symptoms

•Slipping or hesitation during gear changes
•Unusual engine revving without corresponding acceleration
•Delayed engagement when shifting from park to drive/reverse
•Transmission fluid leaks under the vehicle
•Warning lights illuminated on the dashboard, such as the check engine light

Diagnostic Steps

1
Check for any stored error codes using an OBD-II scanner.
2
Inspect the transmission fluid level and condition (color and smell).
3
Look for visible leaks around the transmission and associated lines.
4
Test drive the vehicle to replicate the slipping issue under various driving conditions.
5
Inspect the transmission filter for clogs or contamination.
6
Check the transmission control module (TCM) for proper operation.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Transmission fluid
•Funnel
•Rags

Parts Required

•Transmission filter
•Transmission pan gasket
•Transmission fluid

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check for any stored error codes using an OBD-II scanner.
2
Inspect the transmission fluid level and condition (color and smell).
3
Look for visible leaks around the transmission and associated lines.
4
Test drive the vehicle to replicate the slipping issue under various driving conditions.
5
Inspect the transmission filter for clogs or contamination.
6
Check the transmission control module (TCM) for proper operation.

Solution

1. Preparation

Tools Required: OBD-II scanner, socket set, transmission fluid, funnel, rags.
Safety Warnings: Ensure the vehicle is on a level surface and the engine is off before starting work.

2. Fluid Inspection and Replacement

Check Fluid Level:
- Locate the transmission dipstick.
- Pull the dipstick, wipe it clean, reinsert, and remove it again to check the fluid level.
- If low, add the recommended transmission fluid.
Inspect Fluid Condition:
- If the fluid is dark, burnt, or has a foul smell, it needs to be replaced.
Drain Old Fluid:
- Place a drain pan under the transmission pan.
- Remove the transmission pan bolts and carefully lower the pan to drain fluid.
- Clean the pan and magnet inside for metal debris.
Replace Filter:
- Remove the old transmission filter.
- Install the new filter, ensuring it is seated properly.
Reinstall Pan:
- Apply a new gasket to the pan.
- Reinstall the pan and torque bolts to manufacturer specifications.
Refill Transmission Fluid:
- Using a funnel, add new transmission fluid through the dipstick tube until it reaches the proper level.

3. Electrical and Mechanical Inspection

Inspect Wiring and Connectors:
- Check for damaged or corroded wiring related to the transmission control module.
- Ensure all connectors are secure.
Test TCM:
- If the TCM is suspected to be malfunctioning, it may need to be tested with a specialized tool or replaced.