my Toyota Camry XV70 (2018-2024) headlights won't turn on what should I check

Toyota Camry XV80 (2025-Present)

Error Codes

1-2 hours

Time

medium

Difficulty

medium

Severity

3 min read

518 words

Problem Statement

Learn how to diagnose and fix headlights not turning on for Toyota Camry XV70 (2018-2024). Step-by-step guide with symptoms, diagnostic steps, and solutions.

Affected Component

Electrical

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect battery before working on electrical systems.
•Allow the engine to cool before inspecting components around it.

Symptoms

•Headlight switch does not activate headlights
•No illumination from low or high beams
•Dashboard indicator for headlights may not illuminate
•Fog lights may still function (if equipped)
•Headlight relay may click when the switch is activated

Diagnostic Steps

1
Check the headlight switch for proper operation and position.
2
Inspect the headlight bulbs for burn-out or damage.
3
Test the headlight fuse using a multimeter for continuity.
4
Examine the headlight relay for faults; swap with a known good relay if necessary.
5
Use an OBD-II scanner to check for any related error codes.
6
Inspect wiring and connectors for corrosion or damage.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Multimeter
•Socket set
•Replacement bulbs
•Fuses
•Relays
•Screwdriver set
•Electrical contact cleaner

Parts Required

•Headlight bulbs (if necessary)
•Fuses (if blown)
•Headlight relay (if faulty)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check the headlight switch for proper operation and position.
2
Inspect the headlight bulbs for burn-out or damage.
3
Test the headlight fuse using a multimeter for continuity.
4
Examine the headlight relay for faults; swap with a known good relay if necessary.
5
Use an OBD-II scanner to check for any related error codes.
6
Inspect wiring and connectors for corrosion or damage.

Solution

1. Preparation

Gather tools: multimeter, socket set, replacement bulbs, fuses, and relays if needed.
Ensure the vehicle is parked on a flat surface and the engine is off.
Disconnect the battery to prevent electrical shorts.

2. Inspect and Replace Headlight Bulbs

Remove the headlight assembly if necessary:
- Unscrew any retaining screws and disconnect the wiring harness.
Replace any burnt-out bulbs:
- Pull out the old bulb carefully, avoiding touching the glass.
- Insert the new bulb, ensuring it is seated properly.
Reassemble the headlight assembly and reconnect the harness.

3. Check and Replace Fuses

Locate the fuse box (typically under the dashboard or in the engine bay).
Identify the headlight fuse and remove it.
Test the fuse with a multimeter; replace it if it’s blown.
Reinstall the fuse and ensure it is seated correctly.

4. Test and Replace Headlight Relay

Locate the headlight relay in the fuse box.
Remove the relay and inspect for signs of damage or corrosion.
Swap the relay with another of the same type (e.g., if available) to test functionality.
If the headlights function with the swapped relay, replace the relay.

5. Inspect Wiring and Connectors

Visually examine wiring harnesses leading to the headlights for fraying or disconnections.
Clean any corroded connectors using electrical contact cleaner.
Repair or replace any damaged wiring as necessary.