my Toyota Camry XV40 (2007-2011) is shaking when I accelerate, what’s wrong?

Solution

1. Preparation

• Gather necessary tools and parts.
• Park the vehicle on a level surface and engage the parking brake.
• Wear safety glasses and gloves.

2. Inspect and Replace Tires

• Sub-steps:
  1. Remove the wheel with the affected tire using a lug wrench.
  2. Inspect the tire for uneven wear or bulges; replace if necessary.
  3. Inflate the tire to the manufacturer’s recommended pressure (found on the driver’s door jamb).
  4. Reinstall the wheel and torque lug nuts to specification (typically 76 ft-lbs).

3. Inspect and Replace Suspension Components

• Sub-steps:
  1. Lift the front or rear of the vehicle using a jack and secure with jack stands.
  2. Visually inspect control arms, bushings, and tie rods for wear or damage.
  3. If any components show signs of wear, replace them with OEM parts.
  4. Reassemble and lower the vehicle.

4. Inspect Driveshaft and CV Joints

• Sub-steps:
  1. Raise the vehicle and secure it with jack stands.
  2. Check the driveshaft for any visible damage or excessive play in the joints.
  3. If the CV joints are damaged, replace them by removing the axle nut and separating the joint from the transmission.
  4. Install new CV joint or driveshaft and torque to specification.

5. Check Engine and Transmission Mounts

• Sub-steps:
  1. Start the engine and visually inspect engine mounts for excessive movement.
  2. If mounts are cracked or collapsed, replace them.
  3. To replace, remove the mounting bolts and install new mounts, torquing to the manufacturer’s specifications.