how to reset tire pressure light on Toyota Camry XV70 (2018-2024)

Toyota Camry XV80 (2025-Present)

Error Codes

10-20 minutes

Time

easy

Difficulty

medium

Severity

3 min read

460 words

Problem Statement

Learn how to reset the tire pressure light on your 2018-2024 Toyota Camry XV70. Step-by-step guide with diagnostic steps and safety tips.

Affected Component

Electrical

Estimated Time

10-20 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always check tire pressures when tires are cold for accurate readings.

Symptoms

•Tire pressure warning light illuminated on the dashboard
•Tires may be under-inflated or over-inflated
•Possible fluctuation in tire pressure readings
•Warning light persists after adjusting tire pressures

Diagnostic Steps

1
Check all tire pressures using a reliable tire pressure gauge.
2
Confirm that all tires (including the spare, if applicable) are inflated to the manufacturer's recommended PSI levels.
3
Inspect tires for any visible damage or signs of a slow leak.
4
Verify that the tire pressure monitoring system (TPMS) sensors are functioning properly.
5
Ensure that the vehicle is in 'ON' mode without starting the engine when attempting to reset the tire pressure light.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Tire pressure gauge
•OBD-II scanner (if needed)

Parts Required

•None required for the reset process, but consider TPMS sensors if malfunctions are detected.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check all tire pressures using a reliable tire pressure gauge.
2
Confirm that all tires (including the spare, if applicable) are inflated to the manufacturer's recommended PSI levels.
3
Inspect tires for any visible damage or signs of a slow leak.
4
Verify that the tire pressure monitoring system (TPMS) sensors are functioning properly.
5
Ensure that the vehicle is in 'ON' mode without starting the engine when attempting to reset the tire pressure light.

Solution

1. Preparation

Ensure all tires are properly inflated according to the placard located on the driver's side door jamb.
Gather necessary tools: tire pressure gauge and OBD-II scanner (if needed).

2. Reset Tire Pressure Light

Turn on the Ignition:
- Insert the key into the ignition and turn it to the "ON" position without starting the engine.
Locate the TPMS Reset Button:
- Find the TPMS reset button, which is usually located beneath the steering wheel or to the right of the steering column.
Press and Hold the Reset Button:
- Press and hold the TPMS reset button until the tire pressure light blinks three times and then turns off. This indicates that the system is resetting.
Release the Button:
- Release the TPMS reset button.
Turn Off the Ignition:
- Turn the ignition off and then start the engine to confirm the tire pressure light has turned off.

3. Final Check

If the light does not turn off after the reset, it may indicate a malfunction in the TPMS. Further diagnostics may be necessary.