how to reset the tire pressure monitoring system on my Toyota Camry XV70 (2018-2024)

Toyota Camry XV80 (2025-Present)

15-30 minutes

Time

easy

Difficulty

medium

Severity

2 min read

391 words

Problem Statement

Learn how to reset the TPMS on your Toyota Camry XV70 (2018-2024). Step-by-step instructions to resolve tire pressure monitoring issues effectively.

Affected Component

Electrical

Estimated Time

15-30 minutes

Important safety information - read before proceeding

•Always ensure the vehicle is stationary and on a level surface before performing the reset.

1
Verify that all tires, including the spare, are inflated to the manufacturer's recommended pressure.
2
Check the TPMS sensor function using an OBD-II scanner to ensure there are no fault codes related to the system.
3
Inspect the vehicle for any physical damage to the TPMS sensors or tire valves.

After completing the repair, verify that the issue has been resolved:

To prevent this issue from occurring again:

No comments yet

Be the first to share your thoughts

Solution

1. Preparation

Gather all necessary tools and ensure the vehicle is parked on a level surface.
Ensure that all tires are properly inflated to the specified pressure (usually found on the driver's side door jamb).

2. Access the TPMS Reset Procedure

Turn the ignition switch to the "ON" position without starting the engine.
Locate the TPMS reset button, typically found beneath the steering column or in the glove box.

3. Reset the TPMS

Press and hold the TPMS reset button until the TPMS warning light blinks three times, then release the button.
Start the engine and wait for about 20 minutes to allow the system to recalibrate.
Turn the ignition off and restart the vehicle to check if the TPMS light has turned off.