FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the oil maintenance light on Toyota Camry XV40 (2007-2011) - Toyota Camry
Home/Cars/Toyota/Camry/XV80 (2025-Present)/how to reset the oil maintenance light on Toyota Camry XV40 (2007-2011)

how to reset the oil maintenance light on Toyota Camry XV40 (2007-2011)

Toyota Camry XV80 (2025-Present)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
372 words

Problem Statement

Learn how to reset the oil maintenance light on your 2007-2011 Toyota Camry XV40 after an oil change. Step-by-step guide for accurate monitoring.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in 'Park' and the parking brake is engaged before performing the reset.

Symptoms

  • •Oil maintenance light illuminated on the dashboard
  • •Dashboard warning message indicating oil change is due
  • •Engine oil change completed but light remains on

Diagnostic Steps

  1. 1
  2. 2
  3. 3

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None

Parts Required

  • •None

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools: None required for this procedure.
  • Ensure the vehicle is parked on a level surface and is in the "ON" position.
2. Reset the Oil Maintenance Light
  1. Turn the Ignition On: Without starting the engine, turn the ignition key to the "ON" position. The dashboard lights should illuminate.
  2. Set the Trip Meter: Press and hold the trip meter reset button until the trip meter shows "Trip A."
  3. Turn Off the Ignition: Turn the ignition key to the "OFF" position.
  4. Reset the Oil Maintenance Light: While still holding the trip meter reset button, turn the ignition back to the "ON" position. Continue holding the button until the oil maintenance light flashes and then goes off.
  5. Release the Button: Once the oil maintenance light is off, release the trip meter reset button.
  6. Turn Off the Ignition Again: Finally, turn the ignition off and then back on to confirm that the oil maintenance light is no longer illuminated.