how to reset the maintenance light on my Toyota Camry XV70 (2018-2024)?

Toyota Camry XV80 (2025-Present)

Error Codes

5 minutes

Time

easy

Difficulty

low

Severity

2 min read

341 words

Problem Statement

Learn how to reset the maintenance light on your Toyota Camry XV70 (2018-2024) after routine maintenance. Step-by-step guide for a quick reset.

Affected Component

Electrical

Estimated Time

5 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe location before performing the reset.

Symptoms

•Maintenance light is illuminated on the dashboard.
•Vehicle has undergone an oil change or other scheduled maintenance.
•Driver is unable to clear the maintenance reminder through regular means.

Diagnostic Steps

1
Ensure the vehicle is in the 'ON' position (engine off but electrical systems active).
2
Locate the odometer display on the dashboard.
3
Press the gas pedal three times quickly.
4
Verify the maintenance light resets.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Ensure the vehicle is parked on a level surface and the engine is off.

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Tools Required: None
Ensure the vehicle is parked on a level surface and the engine is off.

2. Accessing the Maintenance Light Reset

Turn On the Ignition:
- Insert the key or press the start button to turn on the vehicle’s ignition without starting the engine.
Set the Odometer Display:
- Use the trip meter button to switch the display to the odometer reading (not trip A or trip B).

3. Resetting the Maintenance Light

Press the Gas Pedal:
- Quickly press the gas pedal three times within 5 seconds.
Check for Reset:
- Observe the maintenance light; it should flash and then turn off, indicating a successful reset.

4. Turn Off the Ignition

Turn the ignition off and then back on to ensure the maintenance light is no longer illuminated.