FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on my Toyota Camry XV50 (2012-2017)? - Toyota Camry
Home/Cars/Toyota/Camry/XV80 (2025-Present)/how to reset the maintenance light on my Toyota Camry XV50 (2012-2017)?

how to reset the maintenance light on my Toyota Camry XV50 (2012-2017)?

Toyota Camry XV80 (2025-Present)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
339 words

Problem Statement

Learn how to reset the maintenance light on your 2012-2017 Toyota Camry XV50 with this simple step-by-step guide. No tools required.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in 'Park' or 'Neutral' and the parking brake is engaged before performing the reset.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •No other warning lights present
  • •Vehicle runs normally without performance issues

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None required

Parts Required

  • •None required

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools: None required for this procedure.
  • Ensure the vehicle is parked safely with the engine off.
2. Resetting the Maintenance Light

  1. Position the Vehicle

    • Ensure the car is in a safe, level area with the engine off.

  2. Activate the Ignition

    • Insert the key into the ignition and turn it to the "ON" position without starting the engine.

  3. Reset the Odometer

    • Locate the odometer reset button on the instrument cluster.
    • Press and hold the odometer reset button.

  4. Watch for the Maintenance Light

    • While holding the button, observe the maintenance light.
    • It should blink, then turn off after a few seconds.

  5. Final Check

    • Release the odometer reset button and turn the ignition off. Turn it back on to ensure the maintenance light is no longer illuminated.