how to reset the maintenance light on a Toyota Camry XV70 (2018-2024)

Toyota Camry XV80 (2025-Present)

Error Codes

10-15 minutes

Time

easy

Difficulty

low

Severity

2 min read

395 words

Problem Statement

Learn how to reset the maintenance light on your Toyota Camry XV70 (2018-2024) with this step-by-step guide. Quick and easy instructions included.

Affected Component

Electrical

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is stationary and in 'Park' before performing the reset procedure.

Symptoms

•Maintenance light illuminated on the dashboard
•Reminder message displayed on the Multi-Information Display (MID)
•No other warning lights activated
•No changes in vehicle performance

Diagnostic Steps

1
Confirm the maintenance light is the only warning light illuminated.
2
Ensure that the required maintenance service has been performed (e.g., oil change, filter replacement).
3
Check the vehicle's owner's manual for specific maintenance light reset instructions.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required for the reset process.

Parts Required

•None required for the reset process.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Ensure the vehicle is turned off.
Gather necessary tools: None required for this procedure.
Safety Warning: Ensure the vehicle is in "Park" with the engine off before starting.

2. Access the Ignition

Press the Start/Stop button twice without pressing the brake pedal to turn on the vehicle's electrical system (but not the engine).

3. Reset the Maintenance Light

Using the Multi-Information Display (MID) Controls:
- Locate the trip meter button on the instrument panel.
- Press the trip meter button until the trip A display is shown.
Turn Off the Ignition:
- Turn off the ignition completely.
Hold the Trip Meter Button:
- Press and hold the trip meter button again.
Turn On the Ignition:
- While holding the trip meter button, press the Start/Stop button twice to turn on the electrical system (do not start the engine).
Release the Button:
- After a few seconds, the maintenance light will flash and then turn off. Release the trip meter button.

4. Confirm the Reset

Check that the maintenance light is no longer illuminated when the vehicle is restarted.