FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on a Toyota Camry XV70 (2018-2024) - Toyota Camry
Home/Cars/Toyota/Camry/XV80 (2025-Present)/how to reset the maintenance light on a Toyota Camry XV70 (2018-2024)

how to reset the maintenance light on a Toyota Camry XV70 (2018-2024)

Toyota Camry XV80 (2025-Present)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
339 words

Problem Statement

Learn how to reset the maintenance light on a 2018-2024 Toyota Camry XV70. Step-by-step guide for quick and easy maintenance light reset.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in 'Park' mode to avoid unexpected movement.

Symptoms

  • •Maintenance light is illuminated on the dashboard
  • •No other warning lights are present
  • •No performance issues or unusual sounds from the vehicle

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None

Parts Required

  • •None

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Ensure the vehicle is parked on a level surface.
  • Gather necessary tools: none required.
2. Reset Maintenance Light
  1. Turn Off the Vehicle: Make sure the vehicle is completely turned off.
  2. Press and Hold the ODO/TRIP Button: Locate the ODO/TRIP button on the instrument cluster and press it down firmly.
  3. Ignition On: While still holding the ODO/TRIP button, turn the ignition key to the "ON" position (do not start the engine).
  4. Wait for Reset Confirmation: Keep holding the button until the maintenance light blinks and goes off, which usually takes around 10 seconds.
  5. Release the Button: Once the light is off, release the ODO/TRIP button.
  6. Turn Off Ignition: Turn the ignition back to the "OFF" position to complete the reset process.