how to reset the maintenance light in Toyota Camry XV70 (2018-2024)?

Toyota Camry XV80 (2025-Present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

358 words

Problem Statement

Learn how to reset the maintenance light in Toyota Camry XV70 (2018-2024) with this step-by-step guide. Ensure your vehicle is ready for the road.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' or neutral and on a flat surface before performing the reset.

Symptoms

•Maintenance light illuminated on the dashboard
•No changes in vehicle performance or operation
•Reminder for scheduled maintenance is displayed

Diagnostic Steps

1
Ensure the vehicle is parked and in the 'ON' position without starting the engine.
2
Access the odometer display on the instrument cluster.
3
Verify that the maintenance light is illuminated before attempting the reset.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required for this procedure.

Parts Required

•None required for this procedure.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Ensure the vehicle is in a safe location and the engine is off.
Gather necessary materials, such as the vehicle key or key fob.

2. Turn On Ignition

Insert the key and turn it to the "ON" position without starting the engine, or press the "Start" button twice without pressing the brake pedal.

3. Access the Odometer

Locate the odometer display on the instrument panel.
Press the trip meter reset button until the odometer displays "ODO."

4. Reset the Maintenance Light

With the odometer showing "ODO," turn the ignition off.
Press and hold the trip meter reset button.
While holding the button, turn the ignition back to the "ON" position (do not start the engine).
Continue holding the button until the maintenance light blinks and then turns off, indicating a successful reset.

5. Confirm Reset

Release the trip meter reset button.
Turn off the ignition and then start the vehicle to confirm that the maintenance light is no longer illuminated.