how to fix the windshield wipers that stop working in my Toyota Camry XV50 (2012-2017)?

Toyota Camry XV80 (2025-Present)

Error Codes

1-2 hours

Time

medium

Difficulty

medium

Severity

3 min read

486 words

Problem Statement

Learn how to diagnose and fix windshield wipers not working in Toyota Camry XV50 (2012-2017). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Electrical

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems to prevent shorts or shocks.

Symptoms

•Windshield wipers do not operate at all
•Wipers operate intermittently
•Wipers do not return to the resting position
•Wiper motor makes a noise when activated
•Dashboard warning lights may illuminate

Diagnostic Steps

1
Check the fuse for the windshield wipers using the vehicle's fuse box diagram.
2
Inspect the windshield wiper relay for proper function.
3
Use an OBD-II scanner to check for any related error codes.
4
Test the wiper switch for continuity with a multimeter.
5
Inspect the wiper motor for any visible damage or corrosion.
6
Check the wiring harness for loose connections or frayed wires.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Socket set
•Screwdrivers
•Fuse puller

Parts Required

•Windshield wiper fuse (if blown)
•Wiper relay (if faulty)
•Wiper motor (if defective)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check the fuse for the windshield wipers using the vehicle's fuse box diagram.
2
Inspect the windshield wiper relay for proper function.
3
Use an OBD-II scanner to check for any related error codes.
4
Test the wiper switch for continuity with a multimeter.
5
Inspect the wiper motor for any visible damage or corrosion.
6
Check the wiring harness for loose connections or frayed wires.

Solution

1. Preparation

Gather necessary tools and parts.
Disconnect the vehicle battery to ensure safety.
Park the vehicle on a level surface and ensure the wipers are in the "off" position.

2. Replace Wiper Fuse

Locate the fuse box (usually under the dashboard or in the engine compartment).
Remove the fuse for the windshield wipers using a fuse puller.
Inspect the fuse for continuity; replace if blown with a new fuse of the same amperage.

3. Inspect and Replace Wiper Relay

Locate the wiper relay in the fuse box.
Remove the relay and visually inspect it for damage.
Replace with a new relay if necessary; ensure it is properly seated in the socket.

4. Test and Replace Wiper Motor

Reconnect the battery and activate the windshield wipers.
If the wipers still do not work, disconnect the battery again.
Remove the wiper arms using a socket set and pull them off the splined shafts.
Remove the screws/bolts securing the wiper motor to the mounting bracket.
Disconnect the electrical connector from the wiper motor.
Install the new wiper motor by reversing the removal steps and ensure it’s securely mounted.
Reattach the wiper arms in the correct position.