how to fix P0302 misfire code in Toyota Camry XV50 (2012-2017)

Toyota Camry XV80 (2025-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

Error Code: P0302

4 min read

630 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix P0302 cylinder 2 misfire in Toyota Camry XV50 (2012-2017). Step-by-step guide with diagnostic procedures and repair instructions.

Error Code

P0302

Affected Component

Engine

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical components to prevent shocks.
•Allow the engine to cool before servicing to avoid burns.

Symptoms

•Check engine light illuminated
•Rough idle or stalling
•Decreased acceleration and power
•Increased fuel consumption
•Engine vibrations or noise
•Possible fuel smell from exhaust

Diagnostic Steps

1
Scan the vehicle's onboard computer using an OBD-II scanner to confirm the P0302 code.
2
Inspect the spark plug and ignition coil for cylinder 2 for signs of wear or damage.
3
Perform a compression test on cylinder 2 to check for mechanical issues.
4
Check fuel injector operation for cylinder 2 using a noid light or multimeter.
5
Inspect wiring and connectors related to the ignition coil and fuel injector for corrosion or damage.
6
Check the engine for vacuum leaks that could cause a misfire.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Torque wrench
•Spark plug socket
•Multimeter
•Noid light

Parts Required

•Spark plug (specific to engine specs)
•Ignition coil (if necessary)
•Fuel injector (if necessary)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan the vehicle's onboard computer using an OBD-II scanner to confirm the P0302 code.
2
Inspect the spark plug and ignition coil for cylinder 2 for signs of wear or damage.
3
Perform a compression test on cylinder 2 to check for mechanical issues.
4
Check fuel injector operation for cylinder 2 using a noid light or multimeter.
5
Inspect wiring and connectors related to the ignition coil and fuel injector for corrosion or damage.
6
Check the engine for vacuum leaks that could cause a misfire.

Solution

1. Preparation

Gather tools and parts required for the repair.
Ensure the vehicle is parked on a flat surface and engaged in park or neutral.
Disconnect the negative battery terminal to avoid electrical shocks or shorts.

2. Replace Spark Plug

Remove the ignition coil from cylinder 2:
- Unplug the ignition coil connector.
- Remove the bolt securing the coil using a socket set.
- Gently pull the coil out of the spark plug well.
Remove the spark plug:
- Use a spark plug socket to carefully unscrew and remove the spark plug.
- Inspect the old spark plug for wear, carbon buildup, or damage.
Install new spark plug:
- Ensure the new spark plug is gapped correctly according to manufacturer specifications.
- Hand-tighten the spark plug, then torque it to the recommended specification (typically around 13-16 lb-ft).

3. Replace Ignition Coil (if necessary)

If the ignition coil is damaged, replace it:
- Install the new ignition coil into the spark plug well, ensuring it is seated properly.
- Reinstall the securing bolt and tighten to the specified torque (usually around 80-100 in-lb).
- Reconnect the ignition coil connector.

4. Check Fuel Injector

If further issues persist, inspect or replace the fuel injector for cylinder 2:
- Remove the intake manifold if necessary to access the fuel rail.
- Disconnect the fuel injector connector.
- Remove the retaining clips and pull the fuel injector out of the rail.
- Install the new fuel injector, ensuring it is seated correctly, and reconnect the electrical connector.

5. Reassemble and Reconnect Battery

Reinstall any components that were removed during the process.
Reconnect the negative battery terminal.
Start the engine and allow it to reach normal operating temperature.