why does my Toyota Camry XV50 (2012-2017) shake when I brake

Toyota Camry XV70 (2018-2024)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

512 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix brake shaking issues in Toyota Camry XV50 (2012-2017). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always disconnect the battery when working on electrical components.
•Allow brakes to cool before handling any components to avoid burns.

Symptoms

•Steering wheel shakes during braking
•Vibration felt through the brake pedal
•Vehicle pulls to one side when braking
•Increased stopping distance
•Brake noise (squeaking or grinding) present

Diagnostic Steps

1
Inspect brake pads and rotors for wear and damage.
2
Check rotor thickness and look for warping using a dial indicator.
3
Examine brake calipers for proper operation and sticking.
4
Inspect wheel bearings for play or damage.
5
Check tire condition and balance.
6
Examine suspension components for wear or damage (e.g., control arms, bushings).

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Lug wrench
•Jack and jack stands
•Socket set
•Torque wrench
•Dial indicator (for rotor inspection)
•Brake cleaner

Parts Required

•Brake pads
•Brake rotors (if warped)
•Caliper hardware (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect brake pads and rotors for wear and damage.
2
Check rotor thickness and look for warping using a dial indicator.
3
Examine brake calipers for proper operation and sticking.
4
Inspect wheel bearings for play or damage.
5
Check tire condition and balance.
6
Examine suspension components for wear or damage (e.g., control arms, bushings).

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is on a level surface and securely lifted.
Disconnect the battery (if necessary) for safety.

2. Remove Wheel

Use a lug wrench to loosen the lug nuts while the wheel is still on the ground.
Lift the vehicle using a jack and secure it with jack stands.
Remove the lug nuts and take off the wheel.

3. Inspect and Replace Brake Components

A. Brake Pads

Remove the caliper bolts with a socket wrench.
Slide the caliper off the rotor and support it without stretching the brake line.
Remove old brake pads and inspect for wear.
Install new brake pads, ensuring proper orientation.

B. Brake Rotors

Remove the rotor from the hub. If stuck, gently tap with a rubber mallet.
Inspect the rotor for warping or scoring using a dial indicator.
If warped, replace with a new rotor.
Torque new rotor to specifications (typically 80-100 ft-lbs).

C. Caliper Inspection

Check caliper for any signs of sticking or damage.
Clean and lubricate caliper slides if necessary.

4. Reassemble Components

Reinstall the caliper over the new brake pads.
Tighten caliper bolts to the manufacturer’s specifications.
Reinstall the wheel and lug nuts, tightening in a star pattern to ensure even pressure.
Lower the vehicle and torque the lug nuts to the specified value (typically 75-85 ft-lbs).