why does my Toyota Camry XV50 (2012-2017) shake when I accelerate

Toyota Camry XV70 (2018-2024)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

502 words

Problem Statement

Discover solutions for shaking during acceleration in Toyota Camry XV50 (2012-2017). Step-by-step diagnostic and repair instructions included.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always use jack stands when working under a vehicle.
•Wear safety glasses and gloves when inspecting and handling components.

Symptoms

•Vibration felt through the steering wheel during acceleration
•Shaking from the front or rear of the vehicle
•Increased noise during acceleration
•Uneven tire wear
•Loss of power during acceleration
•Steering wheel misalignment

Diagnostic Steps

1
Inspect tires for uneven wear or damage.
2
Check wheel balance by using a wheel balancer.
3
Inspect suspension components for wear (e.g., bushings, struts).
4
Examine driveshaft and CV joints for damage or excessive play.
5
Scan for any error codes using an OBD-II scanner.
6
Test engine mounts for wear or damage.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Tire pressure gauge
•Jack and jack stands
•Wheel balancer
•Socket set
•Torque wrench
•Pry bar

Parts Required

•Replacement tires (if necessary)
•Suspension components (if worn)
•Driveshaft or CV joints (if damaged)
•Engine mounts (if faulty)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect tires for uneven wear or damage.
2
Check wheel balance by using a wheel balancer.
3
Inspect suspension components for wear (e.g., bushings, struts).
4
Examine driveshaft and CV joints for damage or excessive play.
5
Scan for any error codes using an OBD-II scanner.
6
Test engine mounts for wear or damage.

Solution

1. Preparation

Ensure the vehicle is parked on a flat surface and the parking brake is engaged.
Gather necessary tools and parts.

2. Tire Inspection and Balancing

Sub-steps:
1. Remove the wheel covers or hubcaps if applicable.
2. Inspect each tire for bulges, cuts, or uneven wear patterns.
3. If any issues are found, replace the affected tires.
4. Use a wheel balancer to check and balance all four wheels.
Tools Required: Tire pressure gauge, jack and jack stands, wheel balancer.

3. Suspension Component Inspection

Sub-steps:
1. Lift the vehicle using a jack and secure it on jack stands.
2. Visually inspect the suspension components (e.g., control arms, bushings, struts) for signs of wear or damage.
3. Replace any worn or damaged components.
Tools Required: Socket set, torque wrench, pry bar.

4. Drivetrain Inspection

Sub-steps:
1. Inspect the driveshaft for bends or cracks.
2. Check CV joints for tearing or excessive play.
3. Replace any damaged driveshaft or CV joints as necessary.
Tools Required: Socket set, torque wrench, pry bar.

5. Engine Mount Inspection

Sub-steps:
1. Visually inspect engine mounts for cracks or separation.
2. Use a pry bar to check for excessive movement in the mounts.
3. Replace any damaged engine mounts.
Tools Required: Socket set, pry bar.