FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
Why does my 2022 Toyota Camry XV70 make a grinding noise when braking? - Toyota Camry
Home/Cars/Toyota/Camry/XV70 (2018-2024)/Why does my 2022 Toyota Camry XV70 make a grinding noise when braking?

Why does my 2022 Toyota Camry XV70 make a grinding noise when braking?

Toyota Camry XV70 (2018-2024)

Error Codes
2-3 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
663 words

Problem Statement

Learn about the causes and solutions for grinding noise when braking in the 2022 Toyota Camry XV70. Follow diagnostic steps and repair instructions.

Affected Component
brake system
Estimated Time
2-3 hours

Symptoms

  • •A noticeable grinding noise when applying the brakes.
  • •Noise may be more pronounced during hard braking or at lower speeds.
  • •Vibration in the brake pedal.
  • •Possible decrease in braking efficiency.

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  10. 10
  11. 11

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Jack and jack stands
  • •Lug wrench
  • •Brake cleaner
  • •Torque wrench
  • •Socket set (including 14mm, 17mm sizes)
  • •C-clamp or brake caliper tool
  • •Screwdriver
  • •Safety glasses
  • •Gloves

Additional Information

Affected Component
brake system
Estimated Time
2-3 hours
Difficulty
medium
Severity
medium
Tools Required
9 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Grinding Noise When Braking in 2022 Toyota Camry XV70
Possible Causes
  1. Worn brake pads.
  2. Contaminated brake pads or rotors (dust, debris, moisture).
  3. Glazed brake pads or rotors.
  4. Faulty brake components (calipers, hardware).
  5. Incorrectly installed brake components.
Tools Required
  • Jack and jack stands
  • Lug wrench
  • Brake cleaner
  • Torque wrench
  • Socket set (including 14mm, 17mm sizes)
  • C-clamp or brake caliper tool
  • Screwdriver
  • Safety glasses
  • Gloves
Repair Instructions

If Brake Pads Are Worn:

  1. Remove the Old Brake Pads:

    • Using the C-clamp or brake caliper tool, compress the caliper piston to make room for the new pads.
    • Remove the old pads from the caliper bracket.

  2. Install New Brake Pads:

    • Place the new brake pads into the caliper bracket, ensuring they are seated correctly.
    • Apply a small amount of brake grease to the backing of the pads to prevent squeaking.

  3. Reassemble the Caliper:

    • Slide the caliper back over the new pads and ensure it is seated correctly.
    • Reinstall the caliper bolts and torque them to the manufacturer specifications (typically around 25-30 ft-lbs).

  4. Repeat for Other Side:

    • Repeat the above steps for the other side if necessary.

If Rotors Are Damaged:

  1. Remove the Rotors:

    • If replacing rotors, remove the caliper and bracket, then remove the rotor from the hub. This may require removing retaining screws if present.

  2. Install New Rotors:

    • Clean the new rotors with brake cleaner to remove any protective oil.
    • Install the new rotors onto the hub, securing them with retaining screws if applicable.

  3. Reassemble Caliper and Brake Pads:

    • Follow the same pad installation and caliper reassembly steps as above.
Final Steps

  1. Reinstall Wheel:

    • Place the wheel back onto the hub and hand-tighten the lug nuts.

  2. Lower Vehicle:

    • Remove the jack stands and lower the vehicle.

  3. Torque Lug Nuts:

    • Once on the ground, use the torque wrench to tighten the lug nuts to the manufacturer’s specifications (typically around 76-80 ft-lbs).

  4. Test Brakes:

    • Before driving, pump the brake pedal a few times to ensure the caliper pistons are seated against the new pads.
    • Take the vehicle for a short test drive to ensure the grinding noise is eliminated.
Conclusion

If the grinding noise persists after replacing the brake pads and/or rotors, further investigation may be required into caliper functionality or potential issues with brake lines or fluid. If unsure, consult a professional technician.