FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
What could cause my Toyota Camry XV70 to make a knocking noise when turning? - Toyota Camry
Home/Cars/Toyota/Camry/XV70 (2018-2024)/What could cause my Toyota Camry XV70 to make a knocking noise when turning?

What could cause my Toyota Camry XV70 to make a knocking noise when turning?

Toyota Camry XV70 (2018-2024)

Error Codes
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
681 words

Problem Statement

Learn how to diagnose and repair knocking noises when turning in your Toyota Camry XV70. Identify symptoms, causes, and follow detailed diagnostic steps.

Affected Component
CV joints, suspension components, steering rack, wheel bearings

Symptoms

  • •Knocking or popping noise when the steering wheel is turned
  • •Noise more pronounced when turning sharply or under load
  • •Potential vibrations felt through the steering wheel
  • •No warning lights illuminated on the dashboard

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Flashlight
  • •Jack and jack stands or ramps
  • •Socket set
  • •Torque wrench
  • •Pry bar
  • •Suspension tool kit
  • •CV joint removal tool
  • •Power steering fluid
  • •Bearing puller
  • •Grease

Additional Information

Affected Component
CV joints, suspension components, steering rack, wheel bearings
Difficulty
medium
Severity
medium
Tools Required
10 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Problem Diagnosis: Knocking Noise When Turning in Toyota Camry XV70
Possible Causes
  1. CV Joint Failure: Worn or damaged constant velocity joints can cause knocking noises when turning.
  2. Suspension Components: Worn out bushings, ball joints, or struts can lead to noise during turns.
  3. Steering Rack Issues: A failing steering rack can produce knocking when turning.
  4. Loose or Damaged Exhaust Components: Sometimes exhaust parts can shift and knock against the chassis when turning.
  5. Wheel Bearing Issues: Damaged wheel bearings can create noise during turns.
Repair Instructions

If CV Joint is Damaged

  1. Tools Required: Socket set, CV joint removal tool, grease, new CV joint.
  2. Raise the vehicle and remove the front wheel.
  3. Remove the axle nut using a socket.
  4. Disconnect the lower control arm from the knuckle to free the axle.
  5. Pull the axle out of the transmission (may require a puller).
  6. Replace the CV joint and reassemble in reverse order, ensuring to torque the axle nut to manufacturer specifications.

If Suspension Components are Worn

  1. Tools Required: Socket set, torque wrench, pry bar, suspension tool kit.
  2. Identify the worn components based on inspection.
  3. Replace any damaged bushings, ball joints, or struts.
  4. Ensure all nuts and bolts are torqued to specifications.
  5. Perform an alignment if necessary.

If Steering Rack is Faulty

  1. Tools Required: Socket set, power steering fluid, possibly a steering rack replacement kit.
  2. Disconnect the battery and remove any necessary covers to access the steering rack.
  3. Drain power steering fluid and disconnect the fluid lines.
  4. Remove the steering column connection and mounting bolts.
  5. Install the new steering rack and reconnect all components.
  6. Refill power steering fluid and bleed the system.

If Wheel Bearings are Bad

  1. Tools Required: Socket set, bearing puller, grease.
  2. Remove the wheel and brake caliper.
  3. Detach the rotor and hub assembly.
  4. Use a bearing puller to remove the old bearing.
  5. Install the new bearing, ensuring proper alignment and lubrication.
  6. Reassemble in reverse order, and check for proper function.
Final Steps
  • After repairs, perform a road test to ensure the knocking noise is resolved.
  • If the problem persists, consider consulting a professional for a more in-depth diagnosis.
  • Regular maintenance checks will help prevent similar issues in the future.