FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
What could be causing the headlights to flicker in my 2019 Toyota Camry? - Toyota Camry
Home/Cars/Toyota/Camry/XV70 (2018-2024)/What could be causing the headlights to flicker in my 2019 Toyota Camry?

What could be causing the headlights to flicker in my 2019 Toyota Camry?

Toyota Camry XV70 (2018-2024)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
602 words

Problem Statement

Learn how to diagnose and repair flickering headlights in your 2019 Toyota Camry with our step-by-step guide.

Affected Component
headlights
Estimated Time
2-4 hours

Symptoms

  • •Headlights flickering or dimming intermittently.
  • •Possible accompanying dashboard lights flickering.
  • •Headlight brightness fluctuating when electrical loads change.

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Flashlight
  • •Inspection gloves
  • •Multimeter
  • •Load tester
  • •Relay tester
  • •Wire brush
  • •Ohmmeter
  • •Wrench set
  • •Socket set
  • •Belt removal tool
  • •Torque wrench

Additional Information

Affected Component
headlights
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
11 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Headlight Flickering in a 2019 Toyota Camry: Diagnosis and Repair

Symptoms:

  • Headlights flickering or dimming intermittently.
  • Possible accompanying dashboard lights flickering.
  • Headlight brightness fluctuating when electrical loads change (e.g., when using AC, radio, etc.).
Potential Causes:
  1. Weak or Failing Alternator
  2. Loose or Corroded Battery Connections
  3. Faulty Headlight Relay
  4. Bad Ground Connection
  5. Defective Headlight Bulbs
  6. Electrical Wiring Issues

Step 1: Visual Inspection

  • Tools Required: Flashlight, Inspection gloves.
  • Check the condition of the headlight bulbs. Look for any signs of damage or burn marks.
  • Inspect battery terminals for corrosion or looseness.
  • Look at the wiring harness for any visible damage or wear.

Step 2: Battery Voltage Test

  • Tools Required: Multimeter.
  • Set the multimeter to DC voltage.
  • Start the vehicle and measure the voltage across the battery terminals. It should read between 13.5 to 14.5 volts with the engine running.
  • If the voltage is below this range, the alternator may be failing.

Step 3: Load Test the Battery

  • Tools Required: Load tester or multimeter with load test function.
  • Disconnect the battery from the vehicle.
  • Use the load tester to apply a load while measuring the voltage. A healthy battery should maintain above 9.6 volts under load.

Step 4: Check Alternator Output

  • Tools Required: Multimeter.
  • With the vehicle running, measure the voltage at the alternator output terminal.
  • If the output voltage is below 13.5 volts or fluctuates significantly, the alternator may need replacement.

Step 5: Inspect Headlight Relay

  • Tools Required: Relay tester (if available).
  • Locate the fuse box (usually under the dashboard or in the engine compartment).
  • Identify the headlight relay and check for proper operation. Swap with a similar relay (if applicable) to test.

Step 6: Ground Connection Check

  • Tools Required: Multimeter, wire brush.
  • Locate ground connections for the headlights, typically near the battery or body.
  • Clean any corrosion with a wire brush and ensure tight connections.

Step 7: Wiring Check

  • Tools Required: Ohmmeter, wiring diagrams (service manual).
  • Using an ohmmeter, check for continuity in the headlight wiring circuits. Look for damaged wires or shorts to ground.
Repair Instructions:

Repairing Loose Connections:

  1. Tools Required: Wrench set, cleaning supplies.
  2. Disconnect the battery cables (negative first).
  3. Clean the battery terminals and cable ends.
  4. Reconnect the battery, ensuring a tight fit.

Replacing the Alternator:

  1. Tools Required: Socket set, belt removal tool, torque wrench.
  2. Disconnect the negative battery cable.
  3. Remove the serpentine belt (use a belt removal tool).
  4. Unbolt the alternator from its mounting (usually 2-3 bolts).
  5. Disconnect the electrical connectors.
  6. Install the new alternator in reverse order. Tighten bolts to manufacturer specifications.
  7. Reinstall the serpentine belt and reconnect the battery.

Replacing Headlight Relay:

  1. Tools Required: None (usually hand-operated).
  2. Remove the relay from the fuse box by pulling it straight out.
  3. Insert a new relay in the same slot.
  4. Test the headlights to ensure operation.

Repairing Ground Connections:

  1. Tools Required: Wrench set, wire brush.
  2. Remove the ground connection.
  3. Clean the connection point and the wire terminal.
  4. Reattach the ground connection securely.
Conclusion:

After performing these diagnostic steps and repairs, check the headlights again to ensure the flickering issue is resolved. If the problem persists, further diagnosis of the vehicle’s electrical system may be necessary, potentially requiring advanced tools like an oscilloscope or consultation with a professional technician.