FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
What are the common problems with the Toyota Camry XV70's struts? - Toyota Camry
Home/Cars/Toyota/Camry/XV70 (2018-2024)/What are the common problems with the Toyota Camry XV70's struts?

What are the common problems with the Toyota Camry XV70's struts?

Toyota Camry XV70 (2018-2024)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
718 words

Problem Statement

Discover the common issues related to the struts of the Toyota Camry XV70, including symptoms, diagnostic steps, and repair instructions.

Affected Component
struts
Estimated Time
2-4 hours

Symptoms

  • •Excessive Bouncing
  • •Uneven Tire Wear
  • •Poor Handling
  • •Fluid Leakage
  • •Noisy Struts

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Floor jack and jack stands
  • •Socket set (including deep sockets)
  • •Wrench set
  • •Torque wrench
  • •Strut spring compressor (if replacing struts)
  • •Pry bar
  • •Screwdrivers (flathead and Phillips)
  • •Safety goggles and gloves

Additional Information

Affected Component
struts
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
8 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Common Problems with the Toyota Camry XV70's Struts

The Toyota Camry XV70, produced from 2018 to 2024, may experience several common issues related to its struts. Below are the details of these problems, along with symptoms, diagnostic steps, tools required, and repair instructions.

Common Symptoms of Strut Problems
  1. Excessive Bouncing: The vehicle may bounce excessively after hitting bumps or potholes.
  2. Uneven Tire Wear: Noticeable wear on the tires, especially on the inner or outer edges.
  3. Poor Handling: The car may feel loose or unstable while driving, especially during cornering.
  4. Fluid Leakage: Visible oil or hydraulic fluid leaks around the strut assembly.
  5. Noisy Struts: Clunking or knocking noises when driving over bumps or uneven surfaces.
Tools Required
  • Floor jack and jack stands
  • Socket set (including deep sockets)
  • Wrench set
  • Torque wrench
  • Strut spring compressor (if replacing struts)
  • Pry bar
  • Screwdrivers (flathead and Phillips)
  • Safety goggles and gloves
Repair Instructions

Step 1: Prepare the Vehicle

  1. Park on a Level Surface:

    • Ensure the vehicle is on a flat, level surface and engage the parking brake.

  2. Lift the Vehicle:

    • Use a floor jack to lift the front or rear of the vehicle and secure it with jack stands.

Step 2: Remove the Wheel

  1. Loosen Lug Nuts:

    • Using the lug wrench, loosen the lug nuts on the wheel corresponding to the strut being inspected or replaced.

  2. Remove Wheel:

    • Completely remove the lug nuts and take the wheel off to access the strut assembly.

Step 3: Remove the Strut Assembly

  1. Disconnect the Brake Line:

    • If necessary, unclip the brake line from the strut assembly to prevent damage.

  2. Remove the Strut Mount Bolts:

    • Locate and remove the bolts securing the strut to the steering knuckle. Typically, there are two or three bolts.

  3. Access the Top Strut Mount:

    • Open the hood and locate the top strut mount. Remove the nuts securing the strut mount to the body of the vehicle.

  4. Remove the Strut Assembly:

    • Carefully pull the strut assembly out from the wheel well, ensuring you do not damage any connected components.

Step 4: Inspect and Replace

  1. Inspect the Strut Assembly:

    • Check for signs of wear or damage. If the strut is leaking or damaged, proceed to replace it.

  2. Reinstall the Strut Assembly:

    • If replacing, use a strut spring compressor to safely compress the coil spring and transfer it to the new strut.
    • Position the new or inspected strut back into the wheel well. Secure it to the top mount with the nuts and to the steering knuckle with the bolts.

Step 5: Reassemble and Test

  1. Reattach the Brake Line:

    • Clip the brake line back into place if it was disconnected.

  2. Reinstall the Wheel:

    • Place the wheel back onto the hub and hand-tighten the lug nuts.

  3. Lower the Vehicle:

    • Carefully lower the vehicle back to the ground.

  4. Torque the Lug Nuts:

    • Use a torque wrench to tighten the lug nuts to the manufacturer’s specifications (typically around 76-80 ft-lbs for most Camrys).

  5. Test Drive:

    • Take the vehicle for a test drive to ensure that handling and comfort have improved.
Conclusion

Regular maintenance of the strut assembly is crucial for the performance and safety of the Toyota Camry XV70. If symptoms of strut failure are observed, it's important to diagnose and repair the issue promptly to prevent further damage to the vehicle's suspension system. If you're unsure about performing these tasks, it’s recommended to consult a professional mechanic.