my Toyota Camry XV50 (2012-2017) key fob is not working, what can I do?

Toyota Camry XV70 (2018-2024)

Error Codes

30 minutes to 1 hour

Time

easy

Difficulty

medium

Severity

3 min read

426 words

Problem Statement

Learn how to troubleshoot and fix a non-working key fob for your 2012-2017 Toyota Camry XV50. Step-by-step guide with diagnostic steps and solutions.

Affected Component

Electrical

Estimated Time

30 minutes to 1 hour

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is turned off before working on the key fob.

Symptoms

•Key fob buttons unresponsive
•Indicator light on the key fob not illuminating
•Vehicle not recognizing the key fob when attempting to start
•Check key fob battery warning on dashboard
•Physical key works, but remote functions do not

Diagnostic Steps

1
Inspect the key fob for physical damage or wear.
2
Replace the battery in the key fob with a new CR2032 battery.
3
Test the key fob after battery replacement to see if it works.
4
Check for interference from other electronic devices or key fob proximity to the vehicle.
5
Use a spare key fob to determine if the issue is with the key fob or the vehicle.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Flathead screwdriver
•Small container for screws

Parts Required

•CR2032 battery

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the key fob for physical damage or wear.
2
Replace the battery in the key fob with a new CR2032 battery.
3
Test the key fob after battery replacement to see if it works.
4
Check for interference from other electronic devices or key fob proximity to the vehicle.
5
Use a spare key fob to determine if the issue is with the key fob or the vehicle.

Solution

1. Preparation

Gather necessary tools: flathead screwdriver, CR2032 battery, and a small container to hold screws.
Ensure the vehicle is in a safe location and turned off.
Wear safety gloves to prevent any injuries.

2. Open the Key Fob

Use the flathead screwdriver to gently pry open the key fob along the seam.
Carefully separate the two halves of the fob without damaging the internal components.

3. Replace the Battery

Remove the old CR2032 battery from its housing, noting the orientation.
Insert the new CR2032 battery with the correct polarity (positive side facing up).

4. Reassemble the Key Fob

Align the two halves of the key fob and carefully press them back together, ensuring all clips engage securely.
If applicable, reinsert any screws that were removed.

5. Test the Key Fob

Stand near the vehicle and press the buttons on the key fob to check for functionality.
If the fob does not work, proceed to check for vehicle-related issues.