how to reset the tire pressure light on Toyota Camry XV50 (2012-2017)

Toyota Camry XV70 (2018-2024)

15-30 minutes

Time

easy

Difficulty

medium

Severity

2 min read

376 words

Problem Statement

Learn how to reset the tire pressure light on a 2012-2017 Toyota Camry XV50. Step-by-step guide to ensure your TPMS is functioning correctly.

Affected Component

Electrical

Estimated Time

15-30 minutes

Important safety information - read before proceeding

•Ensure the vehicle is stationary and in a safe location before performing the reset.

1
Verify that all tires, including the spare, are inflated to the recommended pressure.
2
Check for any visible damage to the tires or TPMS sensors.
3
Ensure the vehicle is in the 'On' position without starting the engine to perform the reset procedure.

After completing the repair, verify that the issue has been resolved:

To prevent this issue from occurring again:

No comments yet

Be the first to share your thoughts

Solution

1. Preparation

Gather necessary tools: None required for this procedure.
Ensure vehicle is parked on a level surface and the ignition is in the "On" position.

2. Resetting the TPMS

Locate the TPMS reset button, usually found beneath the steering wheel or near the dashboard.
Press and hold the TPMS reset button until the tire pressure warning light blinks three times, then release the button.
Start the engine and allow the vehicle to run for a few minutes to ensure the TPMS recalibrates.
Drive the vehicle at a speed of 25 mph or more for about 10 minutes to confirm that the system resets.

3. Final Check

After driving, check if the tire pressure warning light remains off. If the light persists, recheck the tire pressures and ensure there are no underlying issues with the TPMS sensors.