FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on Toyota Camry XV70 (2018-2024) - Toyota Camry
Home/Cars/Toyota/Camry/XV70 (2018-2024)/how to reset the maintenance light on Toyota Camry XV70 (2018-2024)

how to reset the maintenance light on Toyota Camry XV70 (2018-2024)

Toyota Camry XV70 (2018-2024)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
312 words

Problem Statement

Learn how to reset the maintenance light on Toyota Camry XV70 (2018-2024) with this quick guide. Step-by-step instructions for a successful reset.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in a safe, parked position before performing the reset.

Symptoms

  • •Maintenance light remains illuminated on the dashboard
  • •No other warning lights present
  • •No impact on vehicle performance

Diagnostic Steps

  1. 1
  2. 2
  3. 3

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Vehicle key or key fob

Parts Required

  • •None

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather the vehicle key and ensure it is in the "OFF" position.
  • Ensure you have access to the vehicle's ignition or start button.
2. Accessing Maintenance Light Reset Mode
  1. Turn the ignition to "ON" (do not start the engine).
  2. Press the gas pedal three times within five seconds.
  3. Watch for the maintenance light to flash and then turn off, confirming the reset.
3. Finalizing the Reset
  1. Turn the ignition back to the "OFF" position.
  2. Start the engine to verify that the maintenance light is no longer illuminated.