how to reset the maintenance light on my Toyota Camry XV70 (2018-2024)

Toyota Camry XV70 (2018-2024)

Error Codes

5 minutes

Time

easy

Difficulty

low

Severity

2 min read

393 words

Problem Statement

Learn how to reset the maintenance light on your 2018-2024 Toyota Camry XV70. Step-by-step guide to ensure your dashboard is clear after maintenance.

Affected Component

Electrical

Estimated Time

5 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park and on a flat surface before starting the procedure.

Symptoms

•Maintenance light illuminated on the dashboard
•No additional mechanical issues present
•Owner has completed required maintenance services

Diagnostic Steps

1
Ensure the vehicle is in the 'OFF' position.
2
Insert the key into the ignition or press the start button without pressing the brake pedal to turn on the electrical systems.
3
Locate the odometer display and ensure it is set to show the total mileage (not the trip mileage).
4
Press and hold the trip reset button on the dashboard.
5
While holding the trip reset button, turn the ignition to the 'ON' position without starting the engine.
6
Continue to hold the trip reset button until the maintenance light resets and the odometer display shows '000000'.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the 'OFF' position.
2
Insert the key into the ignition or press the start button without pressing the brake pedal to turn on the electrical systems.
3
Locate the odometer display and ensure it is set to show the total mileage (not the trip mileage).
4
Press and hold the trip reset button on the dashboard.
5
While holding the trip reset button, turn the ignition to the 'ON' position without starting the engine.
6
Continue to hold the trip reset button until the maintenance light resets and the odometer display shows '000000'.

Solution

1. Preparation

Gather necessary tools: None required for this reset.
Ensure the vehicle is parked safely and the engine is turned off.

2. Ignition and Dashboard Setup

Insert the key into the ignition or press the start button to access the electrical systems.
Make sure the odometer is showing total mileage by pressing the trip button until it displays the total.

3. Resetting the Maintenance Light

Press and hold the trip reset button on the dashboard.
While holding the trip reset button, turn the ignition to the "ON" position without starting the engine.
Keep the trip reset button pressed until the maintenance light turns off, and the odometer displays "000000".

4. Final Check

Release the trip reset button.
Turn the ignition off and then back on to verify that the maintenance light is no longer illuminated.