FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on my Toyota Camry XV70 (2018-2024) - Toyota Camry
Home/Cars/Toyota/Camry/XV70 (2018-2024)/how to reset the maintenance light on my Toyota Camry XV70 (2018-2024)

how to reset the maintenance light on my Toyota Camry XV70 (2018-2024)

Toyota Camry XV70 (2018-2024)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
347 words

Problem Statement

Learn how to reset the maintenance light on your Toyota Camry XV70 (2018-2024) with this simple step-by-step guide. Quick and easy procedure.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in the 'PARK' position before performing the reset.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •No engine performance issues
  • •Light reset procedure required

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •No special tools required

Parts Required

  • •No parts required

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools (if any, such as a clean cloth for the dashboard).
  • Ensure the vehicle is parked safely and the ignition is off.
2. Reset the Maintenance Light
  1. Locate the Odometer Reset Button: This is usually found on the instrument cluster.
  2. Turn Off the Ignition: Make sure the vehicle is completely off.
  3. Press and Hold the Odometer Reset Button: Keep it pressed down.
  4. Turn the Ignition On: Rotate the key to the "ON" position without starting the engine, while still holding the button.
  5. Monitor the Maintenance Light: Keep holding the button until the maintenance light blinks and then goes out, indicating a successful reset.
  6. Release the Odometer Reset Button: Once the light is off, you can release the button.