how to reset the maintenance light on my Toyota Camry XV50 (2012-2017)

Toyota Camry XV70 (2018-2024)

Error Codes

5 minutes

Time

easy

Difficulty

low

Severity

2 min read

356 words

Problem Statement

Learn how to reset the maintenance light on your Toyota Camry XV50 (2012-2017) with this simple step-by-step guide. Ensure your dashboard is clear of reminders.

Affected Component

Electrical

Estimated Time

5 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park (or neutral for manual transmissions) before performing the reset.

Symptoms

•Maintenance light illuminated on the dashboard
•Reminder notifications for maintenance services
•Vehicle performance is unaffected, as this is a simple reset procedure

Diagnostic Steps

1
Turn the ignition off and ensure the vehicle is in the 'OFF' position.
2
Press and hold the trip meter reset button on the instrument panel.
3
While holding the trip meter button, turn the ignition to the 'ON' position (do not start the engine).
4
Continue holding the trip meter reset button until the maintenance light flashes and then turns off.
5
Release the trip meter reset button.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•No tools required

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Turn the ignition off and ensure the vehicle is in the 'OFF' position.
2
Press and hold the trip meter reset button on the instrument panel.
3
While holding the trip meter button, turn the ignition to the 'ON' position (do not start the engine).
4
Continue holding the trip meter reset button until the maintenance light flashes and then turns off.
5
Release the trip meter reset button.

Solution

1. Preparation

Gather necessary tools: None required for this procedure.
Ensure the vehicle is parked on a level surface with the ignition off.

2. Resetting the Maintenance Light

Turn off Ignition: Make sure the ignition is in the OFF position.
Press and Hold Trip Button: Locate the trip meter reset button on the dashboard and press it down.
Turn Ignition to ON: While continuing to hold the trip button, turn the ignition key to the ON position without starting the engine.
Wait for Light to Reset: Keep holding the trip button until the maintenance light flashes and then turns off, which usually takes a few seconds.
Release the Button: Once the light is off, release the trip meter reset button.