how to reset the maintenance light on my Toyota Camry XV50 (2012-2017)

Toyota Camry XV70 (2018-2024)

Error Codes

5 minutes

Time

easy

Difficulty

low

Severity

2 min read

361 words

Problem Statement

Learn how to reset the maintenance light on your 2012-2017 Toyota Camry XV50 with this step-by-step guide. Quick and easy procedure.

Affected Component

Electrical

Estimated Time

5 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park and on a level surface before performing the reset.

Symptoms

•Maintenance light remains on after servicing
•No other warning lights illuminated
•Vehicle has been serviced according to maintenance schedule

Diagnostic Steps

1
Ensure the vehicle is parked, and the engine is turned off.
2
Insert the key into the ignition (do not start the engine).
3
Press the gas pedal three times within five seconds.
4
Turn the ignition to the 'ON' position without starting the engine.
5
Wait for the maintenance light to flash and then turn off.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required for reset procedure.

Parts Required

•None required for reset procedure.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is parked, and the engine is turned off.
2
Insert the key into the ignition (do not start the engine).
3
Press the gas pedal three times within five seconds.
4
Turn the ignition to the 'ON' position without starting the engine.
5
Wait for the maintenance light to flash and then turn off.

Solution

1. Preparation

Gather the necessary keys and ensure the vehicle is in a safe, stationary position.
Have the odometer display in the correct mode.

2. Key Insertion and Positioning

Insert the vehicle key into the ignition.
Do not start the engine; keep it in the "OFF" position.

3. Gas Pedal Sequence

Press the accelerator pedal down three times quickly within five seconds. This action communicates the reset command to the vehicle's computer.

4. Ignition Position Change

Turn the ignition switch to the "ON" position (not starting the engine).
Confirm that all dashboard lights illuminate, including the maintenance light.

5. Wait for the Light to Reset

Observe the maintenance light. It should start to flash and then turn off, indicating a successful reset.
Turn the ignition switch back to the "OFF" position.