how to reset the maintenance light on my Toyota Camry XV50 (2012-2017)

Toyota Camry XV70 (2018-2024)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

369 words

Problem Statement

Learn how to reset the maintenance light on your Toyota Camry XV50 (2012-2017) with this step-by-step guide. Quick and easy instructions included.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe and stationary position before performing the reset.

Symptoms

•Maintenance light illuminated on the dashboard
•Possible reminder message displayed on the Multi-Information Display (MID)
•No impact on vehicle performance

Diagnostic Steps

1
Ensure the vehicle is parked on a level surface and the ignition is turned off.
2
Insert the key into the ignition (if applicable) or ensure the key fob is in the vehicle.
3
Press the odometer button until the trip meter displays 'Trip A' or 'Trip B'.
4
Turn the ignition switch to the 'ON' position without starting the engine.
5
While in the 'Trip A' or 'Trip B' mode, press and hold the odometer button for about 10 seconds until the maintenance light blinks and then turns off.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Key
•Key fob

Parts Required

•None required for the reset process

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is parked on a level surface and the ignition is turned off.
2
Insert the key into the ignition (if applicable) or ensure the key fob is in the vehicle.
3
Press the odometer button until the trip meter displays 'Trip A' or 'Trip B'.
4
Turn the ignition switch to the 'ON' position without starting the engine.
5
While in the 'Trip A' or 'Trip B' mode, press and hold the odometer button for about 10 seconds until the maintenance light blinks and then turns off.

Solution

1. Preparation

Ensure the vehicle is parked safely with the ignition off.
Gather any necessary tools, such as a key or key fob.

2. Resetting the Maintenance Light

Switch to Trip Meter:
- Press the odometer button until "Trip A" or "Trip B" is displayed on the dashboard.
Turn Ignition On:
- Turn the key to the "ON" position (do not start the engine).
Hold Odometer Button:
- Press and hold the odometer button for approximately 10 seconds.
- Watch for the maintenance light to blink and then turn off.

3. Confirmation

After the light turns off, release the odometer button and turn the ignition off before starting the vehicle to ensure the reset has been completed.