How do I reset the maintenance light on a 2021 Toyota Camry?

Toyota Camry XV70 (2018-2024)

Error Codes

15 minutes

Time

easy

Difficulty

low

Severity

2 min read

393 words

Problem Statement

Learn how to easily reset the maintenance light on your 2021 Toyota Camry with step-by-step instructions and diagnostic tips.

Affected Component

maintenance light

Estimated Time

15 minutes

Symptoms

•The maintenance light on the dashboard is illuminated, indicating that scheduled maintenance is due.
•The light may remain on even after completing the required maintenance.

Diagnostic Steps

1
Confirm Maintenance Status: Ensure that all required maintenance (oil change, filter replacement, etc.) has been performed.
2
Check Owner's Manual: Review the vehicle’s owner’s manual for specific maintenance intervals and light indicators.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Vehicle's key fob

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

How to Reset the Maintenance Light on a 2021 Toyota Camry (XV70)

Resetting the maintenance light on your 2021 Toyota Camry is a relatively simple process. Below are the symptoms, diagnostic steps, tools required, and detailed instructions for resetting the maintenance light.

Tools Required

No special tools are required for this procedure, but having the vehicle's key fob handy is necessary.

Step-by-Step Instructions to Reset the Maintenance Light

Turn on the Ignition:
- Insert the key fob into the ignition slot.
- Press the "Start" button without pressing the brake pedal (this will turn on the electrical systems but not start the engine).
Access the Trip Meter:
- Use the steering wheel controls located on the right side of the steering wheel.
- Press the "Display" button or use the arrow keys to navigate to the trip meter display (Trip A or Trip B).
Turn Off the Ignition:
- Once you are on the trip meter display, turn off the ignition completely.
Reset the Maintenance Light:
- While holding down the trip meter reset button (located on the instrument cluster), turn the ignition back to the "ON" position (do not start the engine).
- Continue to hold the trip meter reset button for about 10 seconds.
- The maintenance light will flash and then turn off, indicating that the reset is successful.
Verify the Reset:
- Release the trip meter reset button, and turn off the ignition again.
- Start the vehicle and check to ensure that the maintenance light is no longer illuminated.

Conclusion

After completing these steps, the maintenance light should be reset successfully on your 2021 Toyota Camry. If the light remains on after following this procedure, it may indicate a different issue, and further diagnostics may be required. Always consult your owner's manual for specific vehicle information and maintenance schedules.