How do I reset the maintenance light in my 2020 Toyota Camry?

Toyota Camry XV70 (2018-2024)

Error Codes

easy

Difficulty

low

Severity

3 min read

422 words

Problem Statement

Learn how to easily reset the maintenance light in your 2020 Toyota Camry with our step-by-step guide.

Affected Component

maintenance light

Symptoms

•The maintenance light is illuminated on the dashboard.
•It typically turns on after a set interval (e.g., 5,000 miles or a year) indicating that routine maintenance is due.

Diagnostic Steps

1
Confirm Maintenance Status: Ensure that the required maintenance has been performed.
2
Check for Additional Warnings: Make sure there are no other warning lights that may indicate a different issue.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None. This process can be done without any special tools.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

Resetting the maintenance light in your 2020 Toyota Camry (XV70) is a straightforward process. Below are the detailed steps you need to follow, including symptoms for when the light illuminates, diagnostic steps to ensure it's the correct procedure, and tools required.

Tools Required

None. This process can be done without any special tools.

Reset Procedure for Maintenance Light

Follow these steps carefully:

Step 1: Turn on the Ignition

Insert the key fob into the ignition slot or press the start button without pressing the brake pedal to turn the ignition on. Do not start the engine; you only want to power the electrical systems.

Step 2: Access the Multi-Information Display

Locate the "Menu" button on the steering wheel controls.
Press the "Menu" button until you see the "Settings" option on the display.

Step 3: Navigate to Maintenance Settings

Use the arrow buttons on the steering wheel to scroll down to the "Maintenance" menu option.
Select it by pressing the "OK" button (or equivalent button based on your specific steering wheel layout).

Step 4: Select the Maintenance Reset Option

Within the maintenance menu, look for the option labeled "Oil Maintenance" or "Maintenance Reset".
Select this option.

Step 5: Confirm the Reset

You will be prompted to confirm the reset. Select "Yes" to reset the maintenance light.
A confirmation message will appear on the display indicating that the maintenance light has been successfully reset.

Step 6: Verify the Reset

Turn off the ignition completely.
Restart the vehicle and check to ensure that the maintenance light is no longer illuminated on the dashboard.

Conclusion

Once you have completed these steps, the maintenance light on your 2020 Toyota Camry should be reset, and you can continue driving without the reminder until the next scheduled maintenance. If the light remains illuminated after performing the reset, it may indicate a different issue that requires further diagnostic attention.