How can I fix the trunk release not working in my Toyota Camry XV70?

Toyota Camry XV70 (2018-2024)

Error Codes

1-2 hours

Time

medium

Difficulty

medium

Severity

4 min read

711 words

Problem Statement

Learn how to diagnose and fix the trunk release issue in your Toyota Camry XV70 (2018-2024) with step-by-step instructions and required tools.

Affected Component

trunk release system

Estimated Time

1-2 hours

Symptoms

•The trunk release button on the key fob does not open the trunk.
•The trunk release button inside the car does not operate the trunk.
•The trunk may be able to be opened manually with a key.
•No sounds from the trunk latch or release mechanism when trying to open.

Diagnostic Steps

1
Check the Key Fob Battery
2
Inspect the Trunk Release Button Inside the Vehicle
3
Check for Blown Fuses
4
Examine Wiring and Connections
5
Test the Trunk Latch Mechanism

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Small flathead screwdriver
•replacement battery (typically CR2032)
•Fuse puller or needle-nose pliers
•multimeter
•Wire strippers
•Panel removal tool
•screwdriver

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

Fixing the Trunk Release Not Working in a Toyota Camry XV70 (2018-2024)

Repair Instructions

Step 1: Replace Key Fob Battery

Use the flathead screwdriver to gently pry open the key fob.
Remove the old battery and replace it with a new CR2032 battery, ensuring the positive side is facing up.
Snap the key fob back together and test the trunk release.

Step 2: Inspect and Test the Trunk Release Button

Locate the trunk release button inside the vehicle, usually on the driver's side near the door.
Press the button and listen for sounds from the trunk latch.
If there are no sounds, proceed to check the wiring.

Step 3: Check and Replace Fuses

Locate the fuse box (usually under the dashboard or in the engine compartment).
Identify the trunk release fuse using the fuse diagram on the cover.
Pull the fuse and inspect it. If it is blown (metal strip broken), replace it with a new fuse of the same amperage.
Test the trunk release again.

Step 4: Inspect Wiring and Connections

Remove any plastic covers around the trunk latch area and the trunk release switch.
Visually inspect the wiring for any signs of damage, fraying, or disconnection.
Use a multimeter to test the continuity of wires leading from the switch to the latch.
Repair any damaged wiring by splicing in new wire or redoing connections.

Step 5: Test and Repair the Trunk Latch Mechanism

If the trunk latch is still non-responsive, remove the trunk liner (using a panel removal tool).
Disconnect the latch harness and test it for continuity with the multimeter.
If the latch is faulty, replace the trunk latch assembly. To do this:
- Remove the screws or bolts securing the latch.
- Disconnect it from the wiring harness.
- Install the new latch and reconnect the wiring.
- Reassemble the trunk liner.

Final Check

After performing all the steps, test both the key fob and the interior trunk release button to ensure they are functioning correctly.
If the issue persists, consider consulting with a professional technician or visiting a Toyota dealership for further diagnostic assistance.

Tools Summary

Flathead screwdriver
Replacement battery (CR2032)
Fuse puller or needle-nose pliers
Multimeter
Panel removal tool
Screwdriver

Conclusion

Following these steps should help diagnose and fix the trunk release issue in your Toyota Camry XV70. Always ensure safety by disconnecting the battery when working with electrical components. If problems persist, further professional diagnosis might be necessary.