FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
How can I fix the problem of the side mirrors not adjusting in my 2019 Toyota Camry XV70? - Toyota Camry
Home/Cars/Toyota/Camry/XV70 (2018-2024)/How can I fix the problem of the side mirrors not adjusting in my 2019 Toyota Camry XV70?

How can I fix the problem of the side mirrors not adjusting in my 2019 Toyota Camry XV70?

Toyota Camry XV70 (2018-2024)

Error Codes
2-3 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
573 words

Problem Statement

Step-by-step guide to diagnose and repair the side mirrors not adjusting issue in a 2019 Toyota Camry XV70. Learn about symptoms, tools required, and detailed diagnostic steps.

Affected Component
side mirrors
Estimated Time
2-3 hours

Symptoms

  • •Inoperative Side Mirror Control
  • •No Response from Controls
  • •Indicator Lights may not function

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  10. 10

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Multimeter
  • •Screwdrivers (Phillips and flathead)
  • •Trim removal tool
  • •Torque wrench
  • •Replacement parts (if necessary: mirror motor, switch, wiring harness)

Additional Information

Affected Component
side mirrors
Estimated Time
2-3 hours
Difficulty
medium
Severity
medium
Tools Required
5 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Problem: Side Mirrors Not Adjusting in 2019 Toyota Camry XV70
Tools Required:
  • Multimeter
  • Screwdrivers (Phillips and flathead)
  • Trim removal tool
  • Torque wrench
  • Replacement parts (if necessary: mirror motor, switch, wiring harness)
Step-by-Step Diagnostic and Repair Instructions:

Step 1: Initial Inspection

1.1 Inspect the side mirror for physical obstructions.
1.2 Check for any visible damage or corrosion on the mirror assembly.
1.3 Verify that both sides exhibit the same issue to rule out a singular fault.

Step 2: Check the Control Switch

2.1 Remove the Door Panel:

  • Use a trim removal tool to gently pry off the door panel clips.
  • Unscrew any screws holding the door panel in place (typically Phillips screws located near the handle and armrest).
  • Carefully detach the panel from the door, ensuring not to damage any wiring.

2.2 Access the Mirror Control Switch:

  • Locate the mirror control switch on the door panel.
  • Disconnect the wiring harness from the switch.

2.3 Test the Switch:

  • Set your multimeter to the continuity setting.
  • Probe the terminals of the switch to check for continuity when toggled in different positions.
  • If no continuity is found, replace the switch.

Step 3: Inspect Wiring and Connections

3.1 Visual Inspection:

  • Inspect the wiring harness for cuts, corrosion, or loose connections from the switch to the mirror assembly.
  • Look for any signs of wear or damage that might indicate a short.

3.2 Test Wiring:

  • Using the multimeter, check for voltage at the mirror motor connector when the switch is activated.
  • If there is no voltage, the issue may lie further upstream in the wiring or fuse.

Step 4: Check the Fuses

4.1 Locate the Fuse Box:

  • Refer to the owner’s manual for the exact location of the fuse box (usually under the dashboard or in the engine compartment).

4.2 Inspect the Relevant Fuses:

  • Identify the fuse associated with the mirror adjustment (often labeled as "Power Mirrors" or similar).
  • Pull the fuse using a fuse puller or pliers and inspect it for continuity. Replace it if it’s blown.

Step 5: Test the Mirror Motor

5.1 Disconnect the Mirror Motor:

  • If all previous checks are fine, disconnect the mirror motor from the wiring harness.

5.2 Test the Motor:

  • Apply direct voltage from a 12V battery to the mirror motor terminals (ensure you know the polarity).
  • If the mirror adjusts, the motor is fine; if not, replace the mirror assembly.

Step 6: Reassemble and Test

6.1 Reattach the Door Panel:

  • Once repairs are completed, reconnect the door panel by reversing the removal process.
  • Secure all screws and ensure clips are properly inserted.

6.2 Test the System:

  • Activate the mirror adjustment switch to verify functionality.
  • Confirm that both mirrors respond correctly.
Conclusion

If all steps are followed and the mirrors are still not functioning, further diagnostic may be needed, potentially involving body control modules or deeper wiring issues. In cases where an electronic component is at fault, consult with a professional technician or dealership for advanced troubleshooting.