FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
How can I fix a non-functioning key fob in a 2020 Toyota Camry XV70? - Toyota Camry
Home/Cars/Toyota/Camry/XV70 (2018-2024)/How can I fix a non-functioning key fob in a 2020 Toyota Camry XV70?

How can I fix a non-functioning key fob in a 2020 Toyota Camry XV70?

Toyota Camry XV70 (2018-2024)

Error Codes
1-2 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
663 words

Problem Statement

Learn how to diagnose and fix a non-functioning key fob for your 2020 Toyota Camry XV70 with step-by-step instructions.

Affected Component
key fob
Estimated Time
1-2 hours

Symptoms

  • •Key Fob Not Responding
  • •No Unlocking/Locking
  • •Indicator Light Not Illuminating

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Small Phillips screwdriver
  • •flathead screwdriver
  • •replacement battery (CR2032)
  • •vehicle owner’s manual
  • •working spare key (if available)
  • •multimeter

Additional Information

Affected Component
key fob
Estimated Time
1-2 hours
Difficulty
medium
Severity
medium
Tools Required
6 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation

Fixing a Non-Functioning Key Fob in a 2020 Toyota Camry XV70

Step 1: Check the Battery
  • Symptoms: If the key fob is not responding, the most common issue is a dead or weak battery.
  • Tools Required: Small Phillips screwdriver, flathead screwdriver, replacement battery (CR2032).

Instructions:

  1. Open the Key Fob: Use a flathead screwdriver to gently pry open the key fob. There should be a small notch for easy access.
  2. Remove the Old Battery: Note the orientation of the battery (positive and negative sides). Remove it carefully.
  3. Test the Battery: Use a multimeter to check the voltage of the old battery. If it’s below 3.0V, replace it.
  4. Install the New Battery: Insert the new battery ensuring the correct orientation (positive side facing up), and snap the fob back together.
Step 2: Reprogram the Key Fob
  • Symptoms: If the battery is good but the fob still does not work, it may need reprogramming.
  • Tools Required: Vehicle owner’s manual, working spare key (if available).

Instructions:

  1. Enter the Vehicle: With all doors closed, sit in the driver's seat.
  2. Insert the Key: Insert the key into the ignition (or press the start button with the key fob) and turn it to the "ON" position without starting the engine.
  3. Cycle the Ignition: Turn the key back to the “OFF” position and then back to "ON" again. Repeat this step 5 times (for a total of 6 cycles) ending in the "ON" position.
    • You should hear a beep from the vehicle indicating it’s in programming mode.
  4. Press the Lock Button: With the key in the "ON" position, press the "LOCK" button on the key fob. This should program the fob to the vehicle.
  5. Turn the Ignition Off: Turn the key back to "OFF" to exit programming mode.
  6. Test the Key Fob: Try locking and unlocking the car to ensure it works.
Step 3: Check for Interference
  • Symptoms: Sometimes, electronic interference can prevent the key fob from working.
  • Tools Required: None.

Instructions:

  1. Distance Test: Move away from other electronic devices (like cell phones, Wi-Fi routers) and try using the key fob.
  2. Check for Physical Obstructions: Ensure there’s nothing blocking the key fob from transmitting to the car (like thick walls or metal objects).
Step 4: Inspect the Key Fob
  • Symptoms: If the fob is physically damaged (cracks, water damage).
  • Tools Required: Multimeter, replacement fob (if necessary).

Instructions:

  1. Visual Inspection: Check for any visible cracks or damage on the casing.
  2. Check the Circuit Board: If you have the right tools and skills, carefully open the fob and inspect the circuit board for damage, corrosion or loose components.
  3. Replace the Key Fob: If the circuit board is damaged beyond repair, you may need to purchase a new key fob and have it programmed to your vehicle.
Step 5: Visit a Dealer or Locksmith
  • Symptoms: If all previous steps fail, the issue may require professional intervention.
  • Tools Required: None.

Instructions:

  1. Visit a Toyota Dealer: Bring your vehicle and the key fob to a certified Toyota dealer. They can diagnose issues with the key fob or vehicle’s keyless entry system.
  2. Consult a Locksmith: An automotive locksmith can also help with reprogramming or replacing the key fob.
Conclusion

By following the above steps, you should be able to diagnose and potentially fix a non-functioning key fob in your 2020 Toyota Camry XV70. Always ensure that you handle electronic components with care to avoid damage. If problems persist, professional help is recommended.