FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
Why is there a burning smell coming from my 2019 Toyota Camry? - Toyota Camry
Home/Cars/Toyota/Camry/Eighth Generation (2018-present)/Why is there a burning smell coming from my 2019 Toyota Camry?

Why is there a burning smell coming from my 2019 Toyota Camry?

Toyota Camry Eighth Generation (2018-present)

Error Codes
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
586 words

Problem Statement

Learn how to diagnose and fix the burning smell issue in your 2019 Toyota Camry with our detailed guide.

Affected Component
engine, brakes, electrical system

Symptoms

  • •Noticeable burning smell inside or outside the vehicle
  • •Smoke
  • •Unusual noises
  • •Warning lights on the dashboard (e.g., brake, engine, or oil)
  • •Changes in vehicle performance

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Infrared thermometer
  • •Multimeter
  • •Basic hand tools (screwdrivers, wrenches, pliers)
  • •Brake cleaner
  • •Rags or shop towels
  • •Oil catch pan (if checking for leaks)
  • •Inspection mirror
  • •Flashlight

Additional Information

Affected Component
engine, brakes, electrical system
Difficulty
medium
Severity
medium
Tools Required
8 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Problem Diagnosis: Burning Smell from 2019 Toyota Camry

Possible Causes:

  1. Oil Leak: Oil may have leaked onto hot engine components.
  2. Overheated Brakes: Excessive brake use can cause brake components to overheat.
  3. Electrical Issues: Short circuits or damaged wiring can produce a burning smell.
  4. Worn Out Belts or Hoses: Rubber components may be burning due to wear.
  5. Clutch Burn (if applicable): If the vehicle is equipped with a manual transmission, excessive clutch engagement can cause a burning smell.
Tools Required:
  • Infrared thermometer
  • Multimeter
  • Basic hand tools (screwdrivers, wrenches, pliers)
  • Brake cleaner
  • Rags or shop towels
  • Oil catch pan (if checking for leaks)
  • Inspection mirror
  • Flashlight
Repair Instructions:

Step 1: Address Oil Leaks

  1. Locate the Source:

    • Clean the engine area with degreaser to identify oil leaks.
    • Use the oil catch pan to collect any dripping oil.

  2. Replace Gaskets or Seals:

    • If leaks are found, replace the faulty gaskets (e.g., valve cover gasket) or seals.
    • Refill oil to the appropriate level.

Step 2: Inspect and Replace Brake Components

  1. Remove Wheel:

    • Use a jack to lift the vehicle and secure it with jack stands.
    • Remove the wheel to access the brake assembly.

  2. Inspect Brakes:

    • Check brake pads for wear; replace if less than 3 mm thick.
    • Inspect rotors for scoring or overheating; replace if necessary.

  3. Reassemble:

    • Reinstall the wheel and lower the vehicle.
    • Test brakes after repairs.

Step 3: Electrical Issues

  1. Inspect Wiring:

    • Disconnect the battery before working on the electrical system.
    • Use the multimeter to check for continuity in wiring and connectors.
    • Repair or replace any damaged wires.

  2. Check Fuses/Relays:

    • Inspect and replace any blown fuses or malfunctioning relays.

Step 4: Replace Worn Belts or Hoses

  1. Inspect Components:

    • Look for cracks, fraying, or wear on belts and hoses.

  2. Replace as Necessary:

    • Remove the old belt or hose using basic hand tools.
    • Install the new component and ensure proper tension.
Conclusion:

After following the diagnostic and repair steps, take the vehicle for a test drive to ensure the burning smell has dissipated and all repairs are functioning as intended. If the smell persists, further investigation may be necessary, potentially involving a professional mechanic.