Learn how to diagnose and repair shaking issues in your Toyota Camry from 2018 to present. Follow our step-by-step guide for effective solutions.

Problem: Shaking at High Speeds in a Toyota Camry (2018-present)

Tools Required

Tire pressure gauge
Floor jack and jack stands
Lug wrench
Torque wrench
Wheel balancer (if available)
Alignment machine (if available)
Basic hand tools (ratchet set, sockets, wrenches)
Inspection mirror and flashlight

Repair Instructions

Step 1: Check Tire Pressure

Use a tire pressure gauge to check the pressure in all four tires.
Inflate tires to the manufacturer's recommended pressure as indicated on the driver’s side door jamb.

Step 2: Inspect Tires

Visually inspect each tire for:
- Uneven wear patterns (cupping, bald spots).
- Sidewall bulges or punctures.
- Cracks or cuts.
If any damage is found, replace the tire.

Step 3: Balance the Wheels

Remove the wheels using a lug wrench.
Mount the wheel on a wheel balancer.
Follow the machine’s instructions to balance the wheel. Add weights as necessary.
Reinstall the balanced wheel and torque the lug nuts to the manufacturer's specifications (typically 76 ft-lbs).

Step 4: Check Wheel Alignment

If you have access to an alignment machine, perform a four-wheel alignment.
Adjust camber, caster, and toe angles to meet manufacturer specifications.
If you do not have access, take the vehicle to a professional alignment shop.

Step 5: Inspect Suspension Components

Raise the vehicle using a floor jack and secure it with jack stands.
Inspect the following for wear or damage:
- Tie Rods: Check for play by moving them back and forth.
- Ball Joints: Check for excessive movement.
- Control Arms: Look for cracking or bending.
Replace any worn or damaged components.

Step 6: Check Brake Rotors

Inspect brake rotors for warpage:
- Remove the front wheels.
- Use a dial indicator to measure the runout of the rotor.
- If the rotor is warped beyond specifications, consider resurfacing or replacing it.
Reassemble the brake components and wheel.

Final Steps

After performing repairs, take the vehicle for a test drive to confirm that the shaking has been resolved.
Monitor the vehicle for any recurring symptoms.

By following these steps, you should be able to diagnose and repair the shaking issue in your Toyota Camry effectively. If the problem persists after these checks, consider consulting a professional technician for further diagnosis.

Why is my Toyota Camry shaking at high speeds?

Problem Statement

Symptoms

Diagnostic Steps

Solution

💡 Expert Tip

Verification

Prevention Tips

Tools & Equipment Required

Related Faults

Share this solution

Comments

Why is my Toyota Camry shaking at high speeds?

Problem Statement

Symptoms

Diagnostic Steps

Solution

Step 1: Check Tire Pressure

Step 2: Inspect Tires

Step 3: Balance the Wheels

Step 4: Check Wheel Alignment

Step 5: Inspect Suspension Components

Step 6: Check Brake Rotors

💡 Expert Tip

Verification

Prevention Tips

Tools & Equipment Required

Related Faults

Share this solution

Comments

Step 1: Check Tire Pressure

Step 2: Inspect Tires

Step 3: Balance the Wheels

Step 4: Check Wheel Alignment

Step 5: Inspect Suspension Components

Step 6: Check Brake Rotors