FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
Why is my 2020 Toyota Camry making a popping noise when turning? - Toyota Camry
Home/Cars/Toyota/Camry/Eighth Generation (2018-present)/Why is my 2020 Toyota Camry making a popping noise when turning?

Why is my 2020 Toyota Camry making a popping noise when turning?

Toyota Camry Eighth Generation (2018-present)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
669 words

Problem Statement

Learn how to diagnose and repair a popping noise when turning your 2020 Toyota Camry. Follow our step-by-step guide for effective troubleshooting.

Affected Component
CV joints, suspension components, wheel bearings
Estimated Time
2-4 hours

Symptoms

  • •A popping or clicking noise when turning the steering wheel left or right
  • •Noise may become more pronounced during sharper turns or at low speeds
  • •Potential vibrations felt through the steering wheel
  • •No warning lights or dashboard alerts

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Jack and jack stands
  • •Lug wrench
  • •Torque wrench
  • •Socket set (including 10mm, 12mm, and 14mm sockets)
  • •Pry bar
  • •CV boot clamp tool
  • •Mechanic’s stethoscope (optional)

Additional Information

Affected Component
CV joints, suspension components, wheel bearings
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
7 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Problem Diagnosis: Popping Noise When Turning in a 2020 Toyota Camry

Potential Causes

  1. CV Joint Issues: Worn or damaged constant velocity (CV) joints can produce popping noises when turning.
  2. Suspension Components: Worn bushings, struts, or control arms may cause noise during turns.
  3. Wheel Bearings: Failing wheel bearings can create noises during turning.
  4. Loose or Damaged Exhaust Components: Exhaust pipes or hangers may vibrate or hit other components.
  5. Steering Rack Problems: Issues with the steering mechanism may produce unusual noises.
Tools Required
  • Jack and jack stands
  • Lug wrench
  • Torque wrench
  • Socket set (including 10mm, 12mm, and 14mm sockets)
  • Pry bar
  • CV boot clamp tool
  • Mechanic’s stethoscope (optional)
Repair Instructions

Step 1: Raise the Vehicle

  1. Park the Camry on a level surface and engage the parking brake.
  2. Use a jack to lift the front of the vehicle and secure it with jack stands.

Step 2: Inspect the CV Joints

  1. Remove the front wheels using the lug wrench.

  2. Inspect the inner and outer CV joints for damage or torn boots.

  3. If the CV boots are torn, replace the affected CV joint as necessary.

    CV Joint Replacement:

    • Remove the axle nut with a socket.
    • Disconnect the lower control arm or strut to free the CV axle.
    • Remove the old CV joint and install the new one, ensuring to re-grease it.
    • Reassemble and torque bolts to manufacturer specifications.

Step 3: Check Suspension Components

  1. Inspect control arms, bushings, and struts for wear.

  2. If bushings are worn, replace them. This may require disconnecting the control arm from the chassis.

    Bushing Replacement:

    • Use a pry bar to remove the old bushing.
    • Press in the new bushing using a suitable tool or a vise.
    • Reattach the control arm.

Step 4: Inspect Wheel Bearings

  1. If the bearings are suspected to be the cause, remove the wheel hub assembly.

  2. Check for play in the bearings.

  3. Replace bearings if they feel rough or have excessive play.

    Wheel Bearing Replacement:

    • Remove the hub assembly bolts.
    • Press out the old bearings and press in new ones.
    • Reinstall the hub assembly and torque to specifications.

Step 5: Test Drive

  1. Reinstall the wheels and lower the vehicle.
  2. Conduct a test drive to ensure the popping noise has been resolved.
  3. Listen carefully during tight turns to confirm.
Conclusion

By following these detailed steps, you should be able to diagnose and repair the popping noise when turning your 2020 Toyota Camry. If the problem persists after these repairs, consider consulting a professional technician for further diagnosis.