FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
Why is my 2019 Toyota Camry's tire pressure warning light on? - Toyota Camry
Home/Cars/Toyota/Camry/Eighth Generation (2018-present)/Why is my 2019 Toyota Camry's tire pressure warning light on?

Why is my 2019 Toyota Camry's tire pressure warning light on?

Toyota Camry Eighth Generation (2018-present)

Error Codes
1-2 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
611 words

Problem Statement

Learn how to diagnose and fix the tire pressure warning light issue on your 2019 Toyota Camry, including symptoms, diagnostic steps, and required tools.

Affected Component
Tire Pressure Monitoring System (TPMS)
Estimated Time
1-2 hours

Symptoms

  • •Tire Pressure Warning Light is illuminated
  • •Possible Poor Handling
  • •Tire Noise

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Tire pressure gauge
  • •Air compressor
  • •Tire repair kit
  • •Torque wrench
  • •OBD-II scanner
  • •Safety goggles
  • •Gloves

Additional Information

Affected Component
Tire Pressure Monitoring System (TPMS)
Estimated Time
1-2 hours
Difficulty
medium
Severity
medium
Tools Required
7 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Tire Pressure Warning Light On - 2019 Toyota Camry
Tools Required:
  • Tire pressure gauge
  • Air compressor or access to a nearby service station with an air compressor
  • Tire repair kit (if needed)
  • Torque wrench (for wheel lug nuts)
  • OBD-II scanner (optional, for TPMS codes)
  • Safety goggles and gloves
Repair Instructions:

Step 1: Check Tire Pressure

  1. Remove Valve Caps: Unscrew the valve caps from each tire.
  2. Measure Tire Pressure: Press the tire pressure gauge onto the valve stem firmly to get a reading.
  3. Compare with Recommended PSI: Check the reading against the recommended tire pressure (usually found on the driver’s side door jamb).
  4. Inflate Tires: If any tire is below the recommended PSI:
    • Use an air compressor to inflate the tire to the correct pressure.
    • Recheck the pressure after inflation.

Step 2: Inspect Tires for Damage

  1. Examine Tread and Sidewalls: Look for cuts, punctures, or other damage to the tires.
  2. Check for Foreign Objects: Remove any nails or debris if found in the tread.

Step 3: Reset TPMS (if necessary)

  1. Inflate Tires to Correct Pressure: Ensure all tires are at the correct pressure before attempting to reset the TPMS.
  2. Locate the TPMS Reset Button: In the 2019 Camry, this is usually located under the steering wheel.
  3. Press and Hold the Reset Button: Turn the ignition to the "ON" position (do not start the engine) and hold the reset button until the TPMS light blinks three times, then release it.
  4. Start the Car: Run the vehicle for a few minutes to allow the system to calibrate and check if the warning light turns off.

Step 4: Check TPMS Sensors (if warning persists)

  1. Use OBD-II Scanner: Connect an OBD-II scanner to check for any error codes related to the TPMS.
  2. Replace Faulty Sensors: If codes indicate a malfunctioning TPMS sensor, replace the affected tire sensor. This typically involves removing the tire from the rim to access the sensor.

Step 5: Final Checks

  1. Recheck Tire Pressures: After performing repairs and resetting the TPMS, confirm that all tire pressures are still at the correct levels.
  2. Monitor for Recurrence: Drive the vehicle for a few days and monitor the dashboard for any reappearance of the tire pressure warning light.
Conclusion

If, after following these steps, the tire pressure warning light remains illuminated or if you encounter any abnormal issues, it is advisable to consult a professional technician for further diagnosis. Regularly checking tire pressure and maintaining proper tire health will ensure safety and performance.