FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
Why does my Toyota Camry XV70 vibrate during braking? - Toyota Camry
Home/Cars/Toyota/Camry/Eighth Generation (2018-present)/Why does my Toyota Camry XV70 vibrate during braking?

Why does my Toyota Camry XV70 vibrate during braking?

Toyota Camry Eighth Generation (2018-present)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
647 words

Problem Statement

Learn how to diagnose and repair braking vibrations in your Toyota Camry XV70. Follow our step-by-step guide for effective solutions.

Affected Component
braking system
Estimated Time
2-4 hours

Symptoms

  • •A noticeable vibration in the steering wheel or brake pedal.
  • •A shuddering feeling from the front end of the vehicle.
  • •Noise accompanying the vibration, such as grinding or squeaking.
  • •The vibration may worsen when braking from higher speeds.

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Jack and jack stands
  • •Lug wrench
  • •Torque wrench
  • •Brake rotor caliper gauge
  • •Tire balancing machine
  • •Wheel alignment machine (optional)
  • •Brake cleaner
  • •Safety glasses and gloves

Additional Information

Affected Component
braking system
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
8 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Possible Causes
  1. Warped Brake Rotors
  2. Worn Brake Pads
  3. Suspension Issues
  4. Wheel Alignment Problems
  5. Tire Issues (Unbalanced or Worn Tires)
Tools Required
  • Jack and jack stands
  • Lug wrench
  • Torque wrench
  • Brake rotor caliper gauge
  • Tire balancing machine
  • Wheel alignment machine (optional)
  • Brake cleaner
  • Safety glasses and gloves
Repair Instructions

Step 1: Lift the Vehicle

  1. Park the vehicle on a flat surface and engage the parking brake.
  2. Loosen the lug nuts slightly while the vehicle is on the ground.
  3. Jack up the vehicle and secure it with jack stands.
  4. Remove the wheel using a lug wrench.

Step 2: Inspect and Measure Brake Rotors

  1. Remove the brake caliper:

    • Use the appropriate socket to unbolt the caliper from the mounting bracket.
    • Support the caliper with a bungee cord or rope to avoid stress on the brake line.

  2. Remove the brake pads and set them aside.

  3. Measure the rotor thickness:

    • Use the caliper gauge to measure the thickness of the rotor at multiple points.
    • If the rotor thickness varies significantly (more than 0.002 inches), or if the rotor is below the minimum thickness specification, it should be replaced.

  4. Check for warping:

    • Spin the rotor or use a dial indicator to check for runout. If runout exceeds 0.002 inches, the rotor is likely warped and should be resurfaced or replaced.

Step 3: Replace or Resurface Rotors

  1. If the rotors are warped or worn beyond specifications, replace them with new rotors.
  2. If resurfacing is an option, take them to a machine shop to be machined down to a flat surface.

Step 4: Replace Brake Pads

  1. Install new brake pads if necessary, ensuring they are compatible with your rotors.
  2. Apply brake grease to the backing of the pads to prevent squeaking.

Step 5: Reassemble Brake Components

  1. Reattach the brake caliper and torque the bolts to manufacturer specifications.
  2. Reinstall the wheel and hand-tighten lug nuts.

Step 6: Lower the Vehicle

  1. Carefully lower the vehicle back to the ground.
  2. Torque the lug nuts to the manufacturer’s specifications in a crisscross pattern.

Step 7: Test Drive

  1. After completing the repairs, take the vehicle for a test drive to ensure that the vibration during braking has been resolved.
  2. Check for any abnormal noises or additional vibrations.
Conclusion

If the issue persists after replacing the rotors and pads, further inspection of suspension components and wheel alignment may be necessary. If you’re not comfortable performing these repairs, consider consulting with a professional technician for further diagnosis and repair.