why does my Toyota Camry Eighth Generation (2018-present) transmission slip when I accelerate

Toyota Camry Eighth Generation (2018-present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

552 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix transmission slipping in Toyota Camry Eighth Generation (2018-present). Step-by-step guide with symptoms and solutions.

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Allow the engine to cool before working on the transmission.
•Use gloves and safety glasses when handling transmission fluid.

Symptoms

•Transmission slips or hesitates during acceleration
•Unusual engine revving without corresponding vehicle speed increase
•Check engine light illuminated
•Rough shifting between gears
•Fluid leaks under the vehicle
•Increased fuel consumption

Diagnostic Steps

1
Scan the vehicle's onboard diagnostics using an OBD-II scanner to check for any trouble codes.
2
Inspect the transmission fluid level and condition; check for burnt smell or dark coloration.
3
Examine the transmission fluid filter for clogs or restrictions.
4
Check for any external leaks around the transmission housing and seals.
5
Inspect the transmission mounts for wear or damage.
6
Perform a visual inspection of the transmission wiring harness and connectors for damage or loose connections.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Fluid catch pan
•Funnel
•Rags
•Transmission fluid
•Basic hand tools

Parts Required

•Transmission fluid (specific to Toyota specifications)
•Transmission filter
•Gasket (if necessary)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan the vehicle's onboard diagnostics using an OBD-II scanner to check for any trouble codes.
2
Inspect the transmission fluid level and condition; check for burnt smell or dark coloration.
3
Examine the transmission fluid filter for clogs or restrictions.
4
Check for any external leaks around the transmission housing and seals.
5
Inspect the transmission mounts for wear or damage.
6
Perform a visual inspection of the transmission wiring harness and connectors for damage or loose connections.

Solution

1. Preparation

Gather tools: OBD-II scanner, socket set, fluid catch pan, funnel, rags, transmission fluid, and basic hand tools.
Ensure the vehicle is on a level surface, and engage the parking brake.

2. Fluid Check and Replacement

Check Fluid Level:
1. Start the engine and let it warm up to operating temperature.
2. With the vehicle in park, remove the transmission dipstick.
3. Wipe it clean, then reinsert and remove again to check the fluid level.
Fluid Replacement:
1. If the fluid is low, add the appropriate ATF (Automatic Transmission Fluid) as specified in the owner's manual.
2. If fluid is dirty or burnt, drain the fluid from the transmission pan using a catch pan.
3. Remove the transmission pan bolts using a socket set and carefully lower the pan to avoid spilling.
4. Replace the old filter with a new one, ensuring it fits snugly.
5. Clean the pan and reattach it with new gasket material or a new gasket.
6. Refill the transmission with new ATF through the dipstick tube using a funnel.

3. Inspect and Repair Transmission Components

Inspect Transmission Mounts:
1. Visually assess the condition of the transmission mounts.
2. Replace any worn or damaged mounts using a socket set.
Check Wiring and Connections:
1. Examine the wiring harness connected to the transmission.
2. Repair or replace any damaged wires or connectors.

4. Test Drive

Conduct a test drive to confirm the issue has been resolved, paying attention to smoothness of acceleration and shifting.