FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
Why does my 2022 Toyota Camry make a clicking noise when turning? - Toyota Camry
Home/Cars/Toyota/Camry/Eighth Generation (2018-present)/Why does my 2022 Toyota Camry make a clicking noise when turning?

Why does my 2022 Toyota Camry make a clicking noise when turning?

Toyota Camry Eighth Generation (2018-present)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
740 words

Problem Statement

Learn how to diagnose and fix a clicking noise when turning in your 2022 Toyota Camry, including symptoms, causes, and repair steps.

Affected Component
CV joint, Suspension components
Estimated Time
2-4 hours

Symptoms

  • •A clicking or popping noise when turning the steering wheel
  • •Noise more pronounced during sharp turns
  • •Sound varies in intensity depending on vehicle speed

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Flashlight
  • •Jack
  • •Jack stands
  • •Basic hand tools
  • •Torque wrench
  • •Socket set
  • •Pry bar
  • •CV joint puller
  • •Grease
  • •Bearing puller

Additional Information

Affected Component
CV joint, Suspension components
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
10 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Problem Diagnosis: Clicking Noise When Turning in 2022 Toyota Camry
Possible Causes:
  1. CV Joint Failure: The most common cause of clicking noises when turning is a failing constant velocity (CV) joint, particularly the outer joint.
  2. Loose or Worn Suspension Components: Components such as tie rods, control arms, or ball joints may be worn out or loose.
  3. Wheel Bearing Issues: A failing wheel bearing can also create similar noises during turns.
  4. Brake Components: Loose or worn brake pads or calipers may produce a clicking sound.
  5. Debris in Wheel Well: Objects stuck in the wheel well or suspension components can cause clicking noises.

Step 1: Visual Inspection

  • Tools Required: Flashlight, jack, jack stands, and basic hand tools.
  • Procedure:
    1. Park the vehicle on a level surface and engage the parking brake.
    2. Inspect the front wheels and suspension components visually for any visible damage or wear. Look for torn CV boots, loose components, or debris lodged in the wheel well.
    3. Check the CV joints for any grease leakage.

Step 2: Test Drive

  • Procedure:
    1. Drive the vehicle in a safe area and replicate the noise by performing sharp turns to the left and right.
    2. Note the conditions under which the noise occurs. Is it only at low speeds? Does it change with acceleration?

Step 3: Check CV Joints

  • Tools Required: Torque wrench, socket set, pry bar.
  • Procedure:
    1. Lift the front of the vehicle using a jack and secure it with jack stands.
    2. Spin the front wheels by hand while listening for any clicking sounds.
    3. Inspect the inner and outer CV joints for play or movement by using a pry bar to apply pressure. There should be minimal movement; excessive play indicates a failing joint.

Step 4: Inspect Suspension Components

  • Tools Required: Torque wrench, socket set, pry bar.
  • Procedure:
    1. Check the tie rod ends, ball joints, and control arms for play by grabbing them and moving them back and forth.
    2. Look for any signs of wear or damage.

Step 5: Wheel Bearing Check

  • Tools Required: Torque wrench, socket set.
  • Procedure:
    1. Spin the front wheels and listen for noise. A worn wheel bearing may produce a grinding or humming sound.
    2. Check for any lateral movement by trying to wiggle the wheel at 12 o’clock and 6 o’clock positions.
Repair Instructions:

If CV Joint is Failing:

  1. Tools Required: Socket set, CV joint puller, grease, new CV joint or axle assembly.
  2. Procedure:
    1. Remove the wheel and brake caliper (if necessary) to access the CV joint.
    2. Remove the axle nut, usually a large socket size (e.g., 30mm).
    3. Disconnect the lower ball joint or tie rod end to allow the steering knuckle to pivot away.
    4. Pull the CV axle out from the transmission (may require prying).
    5. Install the new CV joint or axle assembly in reverse order of removal. Ensure to use fresh grease and torque all bolts to the manufacturer's specifications.

If Suspension Components are Worn:

  1. Tools Required: Socket set, torque wrench, replacement parts (tie rod ends, ball joints, etc.).
  2. Procedure:
    1. Replace any worn components identified during inspection.
    2. Reassemble and torque to the manufacturer's specifications.

If Wheel Bearing is Failing:

  1. Tools Required: Bearing puller, socket set, new wheel bearings.
  2. Procedure:
    1. Remove the wheel and brake rotor.
    2. Use a bearing puller to remove the old bearing from the hub.
    3. Install the new bearing and reassemble everything in reverse order.
Final Steps:
  • Test Drive: After repairs, take the vehicle for a test drive to confirm that the noise is eliminated.
  • Alignment Check: Consider having a wheel alignment performed after replacing suspension components to ensure proper handling and tire wear.
Conclusion:

A clicking noise while turning in a 2022 Toyota Camry is often related to CV joint issues or worn suspension components. Following the above diagnostic steps and repairs should resolve the issue. If the problem persists, further investigation may be required, possibly involving a professional technician.