FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
Why does my 2020 Toyota Camry make a grinding noise when braking? - Toyota Camry
Home/Cars/Toyota/Camry/Eighth Generation (2018-present)/Why does my 2020 Toyota Camry make a grinding noise when braking?

Why does my 2020 Toyota Camry make a grinding noise when braking?

Toyota Camry Eighth Generation (2018-present)

Error Codes
2-3 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
672 words

Problem Statement

Learn how to diagnose and repair the grinding noise when braking in your 2020 Toyota Camry with these detailed steps and necessary tools.

Affected Component
brake system
Estimated Time
2-3 hours

Symptoms

  • •Grinding noise when applying brakes
  • •Noise may be louder during hard braking
  • •Possible vibration felt through the brake pedal
  • •Reduced braking performance in severe cases

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Jack and jack stands
  • •Lug wrench
  • •Torque wrench
  • •Brake pad gauge or caliper gauge
  • •Micrometer
  • •Brake cleaner
  • •Gloves and safety goggles
  • •Basic hand tools (ratchet set, sockets, etc.)

Additional Information

Affected Component
brake system
Estimated Time
2-3 hours
Difficulty
medium
Severity
medium
Tools Required
8 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnosing and Repairing Grinding Noise When Braking in a 2020 Toyota Camry

Tools Required
  • Jack and jack stands
  • Lug wrench
  • Torque wrench
  • Brake pad gauge or caliper gauge
  • Micrometer
  • Brake cleaner
  • Gloves and safety goggles
  • Basic hand tools (ratchet set, sockets, etc.)
Repair Instructions
Step 1: Lift the Vehicle
  1. Park the car on a level surface and engage the parking brake.
  2. Loosen the lug nuts on the wheel(s) being inspected.
  3. Use a jack to lift the vehicle and support it with jack stands. Remove the wheel.
Step 2: Remove Brake Components

  1. Remove the Caliper

    • Use a socket to remove the caliper bolts.
    • Carefully slide the caliper off the rotor; support it with wire or a bungee cord to avoid straining the brake line.

  2. Remove the Brake Pads

    • Slide out the brake pads from the caliper bracket.
    • Inspect the pads for uneven wear, contamination, or damage.
Step 3: Inspect and Replace as Necessary

  1. Inspect the Rotor

    • Check for scoring, cracks, or excessive wear.
    • If the rotor is damaged or below specifications, it should be resurfaced or replaced.

  2. Replace Brake Pads

    • If the pads are worn below 3mm, replace them.
    • Ensure that the new pads are the correct size and type for your model.

  3. Clean Components

    • Use brake cleaner to remove dust and debris from the caliper, rotor, and brake pads.
Step 4: Reassemble the Brake System

  1. Reattach the Brake Pads

    • Install the new (or cleaned) brake pads into the caliper bracket.

  2. Reinstall the Caliper

    • Slide the caliper back over the brake pads and rotor.
    • Tighten the caliper bolts to the manufacturer’s specified torque.
Step 5: Test and Finalize

  1. Reinstall the Wheel

    • Place the wheel back onto the hub and hand-tighten the lug nuts.
    • Lower the vehicle from the jack stands and tighten the lug nuts to the manufacturer's specifications in a star pattern.

  2. Test the Brakes

    • Start the vehicle and press the brake pedal several times to seat the brake pads.
    • Test drive the vehicle at low speed to ensure the grinding noise is resolved.
Step 6: Additional Considerations
  • If the grinding persists after brake pad replacement, further inspection of brake calipers, fluid condition, and brake lines may be necessary.
  • Consult a professional if you are uncomfortable performing these repairs, as brake components are critical for vehicle safety.

By following these steps, you should be able to diagnose and rectify the grinding noise when braking in your 2020 Toyota Camry effectively.