FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
Why does my 2019 Toyota Camry's engine hesitate during acceleration? - Toyota Camry
Home/Cars/Toyota/Camry/Eighth Generation (2018-present)/Why does my 2019 Toyota Camry's engine hesitate during acceleration?

Why does my 2019 Toyota Camry's engine hesitate during acceleration?

Toyota Camry Eighth Generation (2018-present)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Error Code: P0300, P0171, P0420
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
604 words

Problem Statement

Learn how to diagnose and repair engine hesitation during acceleration in a 2019 Toyota Camry. Follow our step-by-step guide for effective troubleshooting.

Error Code
P0300, P0171, P0420
Affected Component
engine
Estimated Time
2-4 hours

Symptoms

  • •Engine stutters or hesitates when accelerating.
  • •RPMs may drop momentarily before resuming normal operation.
  • •Possible check engine light (CEL) illuminated.
  • •Poor fuel efficiency.
  • •Engine noise may be present (e.g., knocking, backfiring).

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  10. 10
  11. 11
  12. 12
  13. 13
  14. 14

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Fuel pressure gauge
  • •Basic hand tools (screwdrivers, ratchets, sockets)
  • •Cleaning supplies (throttle body cleaner, MAF cleaner)
  • •Multimeter (for sensor testing)

Additional Information

Error Code
P0300, P0171, P0420
Affected Component
engine
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
5 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Engine Hesitation During Acceleration in a 2019 Toyota Camry
Tools Required
  • OBD-II scanner
  • Fuel pressure gauge
  • Basic hand tools (screwdrivers, ratchets, sockets)
  • Cleaning supplies (throttle body cleaner, MAF cleaner)
  • Multimeter (for sensor testing)
Repair Instructions

Step 1: Address Any Fault Codes

  • If DTCs are present, research and address them according to the specific code. For instance, replace faulty ignition coils or spark plugs if misfires are indicated.

Step 2: Clean the Throttle Body

  1. Disconnect the negative battery terminal.
  2. Remove the air intake duct connected to the throttle body.
  3. Use throttle body cleaner and a soft cloth to clean the inside of the throttle body.
  4. Reassemble the intake duct and reconnect the battery.

Step 3: Clean or Replace the MAF Sensor

  1. Locate the MAF sensor on the air intake duct.
  2. Carefully disconnect the electrical connector.
  3. Remove the sensor and spray MAF cleaner on the sensor elements.
  4. Let it dry completely before reinstalling.

Step 4: Inspect and Replace Fuel Filter (if applicable)

  1. Locate the fuel filter (if not integrated into the fuel pump).
  2. Relieve fuel system pressure by removing the fuel pump relay and starting the engine until it stalls.
  3. Disconnect fuel lines and replace the old filter with a new one, ensuring all connections are secure.

Step 5: Check and Replace Spark Plugs

  1. Remove the ignition coils to access the spark plugs.
  2. Use a spark plug socket to remove the old plugs.
  3. Install new spark plugs, ensuring proper gap settings as per manufacturer specifications.

Step 6: Test Drive

  • After performing all repairs and checks, take the vehicle for a test drive to confirm that the hesitation has been resolved.
Conclusion

If the hesitation persists after performing the above diagnostics and repairs, consider further investigation into the engine's control module (ECM) or seek assistance from a professional technician. Regular maintenance and timely attention to such issues can prevent more serious engine problems in the future.